| Surface roughness model for machining mild steel with coated carbide tool Y Sahin, AR Motorcu Materials & design 26 (4), 321-326, 2005 | 294 | 2005 |
| Surface roughness model in machining hardened steel with cubic boron nitride cutting tool Y Sahin, AR Motorcu International Journal of Refractory Metals and Hard Materials 26 (2), 84-90, 2008 | 180 | 2008 |
| Statistical process control in machining, a case study for machine tool capability and process capability AR Motorcu, A Güllü Materials & design 27 (5), 364-372, 2006 | 113 | 2006 |
| The optimization of machining parameters using the Taguchi method for surface roughness of AISI 8660 hardened alloy steel AR Motorcu Journal of mechanical Engineering 56 (6), 391-401, 2010 | 111 | 2010 |
| Surface roughness prediction model in machining of carbon steel by PVD coated cutting tools Y Sahin, AR Motorcu American Journal of Applied Sciences 1 (1), 12-17, 2004 | 84 | 2004 |
| The evaluation of the effects of control factors on surface roughness in the drilling of Waspaloy superalloy AR Motorcu, A Kuş, I Durgun Measurement 58, 394-408, 2014 | 64 | 2014 |
| Optimization of machining parameters for kerf angle and roundness error in abrasive water jet drilling of CFRP composites with different fiber orientation angles M Altin Karataş, AR Motorcu, H Gökkaya Journal of the Brazilian Society of Mechanical Sciences and Engineering 42, 1-27, 2020 | 57 | 2020 |
| An investigation of the effects of cutting parameters and graphite reinforcement on quality characteristics during the drilling of Al/10B4C composites E Ekici, AR Motorcu, G Uzun Measurement 95, 395-404, 2017 | 45 | 2017 |
| Evaluation of control parameters’ effects on system performance with Taguchi method in waste heat recovery application using mechanical heat pump S Coşkun, AR Motorcu, N Yamankaradeniz, E Pulat International journal of refrigeration 35 (4), 795-809, 2012 | 41 | 2012 |
| Evaluation of surface roughness and material removal rate in the wire electrical discharge machining of Al/B4C composites via the Taguchi method E Ekici, AR Motorcu, A Kuş Journal of Composite Materials 50 (18), 2575-2586, 2016 | 33 | 2016 |
| Evaluation of Tool Life-Tool Wear in Milling of Inconel 718 Superalloy and The Investigation of Effects of Cutting Parameters on Surface Roughness with Taguchi Method AR Motorcu, A Kuş, R Arslan, Y Tekin, R Ezentaş Tehnicki vjesnik/Technical Gazette 20 (5), 765-774, 2013 | 32 | 2013 |
| Investigation of the WEDM of Al/B4C/Gr reinforced hybrid composites using the Taguchi method and response surface methodology AR Motorcu, E Ekici, A Kuş Science and Engineering of Composite Materials 23 (4), 435-445, 2016 | 29 | 2016 |
| Study on delamination factor and surface roughness in abrasive water jet drilling of carbon fiber-reinforced polymer composites with different fiber orientation angles M Karataş Altın, AR Motorcu, H Gökkaya Journal of the Brazilian Society of Mechanical Sciences and Engineering 43 …, 2021 | 28 | 2021 |
| Ç1050, Ç4140 ve Ç52100 çeliklerinin farklı takımlarla işlenebilirliği ve modeller geliştirilmesi AR Motorcu Doktora Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, 2006 | 28* | 2006 |
| The effects of process parameters on acceleration amplitude in the drilling of cold work tool steels Y Kaplan, AR Motorcu, M Nalbant, Ş Okay The International Journal of Advanced Manufacturing Technology 80, 1387-1401, 2015 | 25 | 2015 |
| Single and multi-objective optimization for cutting force and surface roughness in peripheral milling of Ti6Al4V using fixed and variable helix angle tools G Sur, AR Motorcu, S Nohutçu Journal of Manufacturing Processes 80, 529-545, 2022 | 23 | 2022 |
| Analysis of the cutting temperature and surface roughness during the orthogonal machining of AISI 4140 alloy steel via the Taguchi method AR Motorcu, Y Isik, A Kus, MC Cakir Materiali in Tehnologije 50 (3), 343-351, 2016 | 22 | 2016 |
| Evaluation of drilling Al/SiC composites with cryogenically treated HSS drills E Ekici, AR Motorcu The International Journal of Advanced Manufacturing Technology 74, 1495-1505, 2014 | 22 | 2014 |
| Tool life performances, wear mechanisms and surface roughness characteristics when turning austenised and quenched AISI 52100 bearing steel with ceramics and CBN/TiC cutting tools AR Motorcu Indian Journal of Engineering and Materials Sciences 18 (2), 137-146, 2011 | 22 | 2011 |
| Investigation of the effects of machining parameters on the thrust force and cutting torque in the drilling of AISI D2 and AISI D3 cold work tool steels Y Kaplan, Ş Okay, AR Motorcu, M Nalbant Indian Journal of Engineering and Materials Sciences 21 (22), 128-138, 2014 | 20 | 2014 |
Yusuf ŞAHİNProfessor of Mechanical Engineering in OSTIM Technical University在 ostimteknik.edu.tr 的电子邮件经过验证
