Effect of Ti addition on tensile properties of Cu-Ni-Si alloys E Lee, S Han, K Euh, S Lim, S Kim Metals and Materials International 17, 569-576, 2011 | 701 | 2011 |
Microstructure and hardness improvement of TiC/stainless steel surface composites fabricated by high-energy electron beam irradiation J Lee, K Euh, JC Oh, S Lee Materials Science and Engineering: A 323 (1-2), 251-259, 2002 | 101 | 2002 |
Precipitation strengthening in naturally aged Al–Zn–Mg–Cu alloy SH Lee, JG Jung, SI Baik, DN Seidman, MS Kim, YK Lee, K Euh Materials Science and Engineering: A 803, 140719, 2021 | 96 | 2021 |
Correlation of microstructure with the wear resistance and fracture toughness of hardfacing alloys reinforced with complex carbides SH Choo, CK Kim, K Euh, S Lee, JY Jung, S Ahn Metallurgical and Materials Transactions A 31, 3041-3052, 2000 | 63 | 2000 |
Thermal conductivity of Al–SiCp composites by plasma spraying M Gui, SB Kang, K Euh Scripta Materialia 52 (1), 51-56, 2005 | 61 | 2005 |
Mechanical property and fracture behavior of squeeze-cast Mg matrix composites KS Sohn, K Euh, S Lee, I Park Metallurgical and Materials Transactions A 29, 2543-2554, 1998 | 53 | 1998 |
Formation of a high-cycle fatigue fracture surface and a crack growth mechanism of ultrafine-grained copper with different stages of microstructural evolution M Goto, SZ Han, K Euh, JH Kang, SS Kim, N Kawagoishi Acta materialia 58 (19), 6294-6305, 2010 | 50 | 2010 |
Effects of ultrasonic melt treatment and solution treatment on the microstructure and mechanical properties of low-density multicomponent Al70Mg10Si10Cu5Zn5 alloy EJ Baek, TY Ahn, JG Jung, JM Lee, YR Cho, K Euh Journal of Alloys and Compounds 696, 450-459, 2017 | 45 | 2017 |
Effects of Ti addition on the microstructure and mechanical properties of Al–Zn–Mg–Cu–Zr alloy SH Lee, JG Jung, SI Baik, SH Park, MS Kim, YK Lee, K Euh Materials Science and Engineering: A 801, 140437, 2021 | 43 | 2021 |
Effect of wire brushing on warm roll bonding of 6XXX/5XXX/6XXX aluminum alloy clad sheets SH Kim, HW Kim, K Euh, JH Kang, JH Cho Materials & Design 35, 290-295, 2012 | 42 | 2012 |
Effects of Ti addition and heat treatments on mechanical and electrical properties of Cu-Ni-Si alloys HG Kim, TW Lee, SM Kim, SZ Han, K Euh, WY Kim, SH Lim Metals and Materials International 19, 61-65, 2013 | 36 | 2013 |
Grain-structure evolution of brazing-treated A4343/A3003/A4343 aluminum brazing sheets rolled with different reductions SH Kim, JH Kang, K Euh, HW Kim Metals and Materials International 21, 276-285, 2015 | 35 | 2015 |
Designing the composition and processing route of aluminum alloys using CALPHAD: Case studies JG Jung, YH Cho, JM Lee, HW Kim, K Euh Calphad 64, 236-247, 2019 | 34 | 2019 |
Effects of C addition and thermo-mechanical treatments on microstructures and properties of Cu–Fe–P alloys HG Kim, SZ Han, K Euh, SH Lim Materials Science and Engineering: A 530, 652-658, 2011 | 34 | 2011 |
Hardness improvement of TiB2/Ti surface-alloyed material fabricated by high-energy electron beam irradiation JC Oh, K Euh, S Lee, Y Koo, NJ Kim Scripta materialia 39 (10), 1389-1394, 1998 | 34 | 1998 |
Microstructure, tensile and fatigue properties of high strength Al 7075 alloy manufactured via twin-roll strip casting MS Baek, K Euh, KA Lee Journal of Materials Research and Technology 9 (5), 9941-9950, 2020 | 33 | 2020 |
Al-SiC powder preparation for electronic packaging aluminum composites by plasma spray processing M Gui, SB Kang, K Euh Journal of thermal spray technology 13, 214-222, 2004 | 33 | 2004 |
Microstructural modification and hardness improvement in boride/Ti–6Al–4V surface-alloyed materials fabricated by high-energy electron beam irradiation K Euh, J Lee, S Lee, Y Koo, NJ Kim Scripta Materialia 45 (1), 1-6, 2001 | 33 | 2001 |
Effects of grain refinement due to severe plastic deformation on the growth behavior of small cracks in copper M Goto, K Kamil, SZ Han, K Euh, SS Kim, Y Yokoho International journal of fatigue 50, 63-71, 2013 | 31 | 2013 |
Microstructure of TiB2/carbon steel surface-alloyed materials fabricated by high-energy electron beam irradiation K Euh, S Lee, K Shin Metallurgical and Materials Transactions A 30, 3143-3151, 1999 | 31 | 1999 |