Combustion characteristics of biodiesel saturated with pyrolysis oil for power generation in gas turbines H Kurji, A Valera-Medina, J Runyon, A Giles, D Pugh, R Marsh, N Cerone, ... Renewable Energy 99, 443-451, 2016 | 50 | 2016 |
Combustion and emission performance of CO2/CH4/biodiesel and CO2/CH4/diesel blends in a Swirl Burner Generator H Kurji, A Valera-Medina, A Okon, CT Chong Energy Procedia 142, 154-159, 2017 | 33 | 2017 |
Magnetic field effect on compression ignition engine performance HJ Kurji, MS Imran ARPN Journal of Engineering and Applied Sciences 13 (12), 3943-3949, 2018 | 15 | 2018 |
The impact of using pure ethanol additives on gasoline fuel with respect to SI engine emissions HJ Kurji, MS Imran, AS Bded IOP Conference Series: Materials Science and Engineering 1067 (1), 012090, 2021 | 7 | 2021 |
The effect of using waste corn oil on compression ignition engine performance MS Imran, HJ Kurji International Journal of Applied Engineering Research 13 (6), 3966-3974, 2018 | 6 | 2018 |
Fuel Flexibility with low emissions for gas turbine engines H Kurji Cardiff University, 2017 | 5 | 2017 |
Modifying performance of solar still, by using slices absorber plate and new design of glass cover, experimental and numerical study AS Shareef, HJ Kurji, AH Hamzah Heliyon 10 (1), 2024 | 4 | 2024 |
A Review of New Solar Still Design Comprising a Five-Sided Glass Cover and Equipped with an External Tank for PCM AS Shareef, HJ Kurji, HA Matrood IOP Conference Series: Earth and Environmental Science 877 (1), 012038, 2021 | 3 | 2021 |
Waste heat conversion in compression ignition engine to the electric power by using exhaust heat recovery system contained TEG MS Imran, HJ Kurji Journal of Mechanical Engineering Research and Developments (JMERD) 42 (5 …, 2019 | 3 | 2019 |
The impact of using biodiesel prepared from waste sunflower oil & iraqi conventional diesel on compression ignition engine performance and emissions MS Imran, HJ Kurji Journal of Mechanical Engineering Research & Developments (JMERD) 41 (3), 32-37, 2018 | 3 | 2018 |
Reduction of emissions by using various syngases with different injection strategies under premixed combustion mode H Kurji, A Okon, A Valera-Medina, C Cheng-Tung 2016 International Conference for Students on Applied Engineering (ICSAE …, 2016 | 3 | 2016 |
Exhaust waste energy harvesting by using a thermoelectric generator with a water heat exchanger MS Imran, HJ Kurji, JA Mahdi, RA ABDULSAHIB Journal of Engineering Science and Technology 18 (4), 2020-2034, 2023 | 2 | 2023 |
Improving fresh water production in solar distillation by adding magnetic flux, solar collector and phase change materials AS Shareef, HJ Kurji, A Omran AIP Conference Proceedings 2830 (1), 2023 | 1 | 2023 |
A Numerical Study to Determine the Effect of an Insulator Location on the Transient Heat Transfer RH Mageed, HJ Kurji, AA Abdulrasool Journal of Ecological Engineering 24 (10), 2023 | 1 | 2023 |
A Review of Solar Desalination Application with Static Magnetic field and Latent Heat Energy Storage AS Shareef, HJ Kurji, A Omran Design Engineering, 13630-13639, 2021 | 1 | 2021 |
A Novel Design for a Solar Still Augmented with an Evacuated Tube Collector: An Experimental Study AS Shareef, HJ Kurji, HA Matrood Design Engineering, 7237-7246, 2021 | 1 | 2021 |
A Review of Using Phase Change Materials to Improve the Productivity of a Solar Still AS Shareef, HJ Kurji, HA Matrood International Journal of Research and Scientific Innovation 8 (8), 176-180, 2021 | 1 | 2021 |
Acoustic dynamics of A swirl premixed combustor with different operating conditions O Aniekan, VM Agustin, K Hayder, X Yiqin Energy Procedia 142, 1674-1679, 2017 | 1 | 2017 |
Heat release rate and pressure fluctuation of lean premixed flame at different forcing levels A Okon, H Kurji, A Medina, Y Xue 2016 International Conference for Students on Applied Engineering (ICSAE …, 2016 | 1 | 2016 |
Modeling and Control of Fuel to Air Ratio in an Internal Combustion Engine with Unknown Evaporation Time and Fuel Fraction Impinging Manifold's Wall AI Hassan, HJ Kurji, NF Jasim Journal of Babylon University/Engineering Sciences 21, 122-131, 2013 | 1 | 2013 |