| Comparison of the cytotoxicity of clinically relevant cobalt–chromium and alumina ceramic wear particles in vitro MA Germain, A Hatton, S Williams, JB Matthews, MH Stone, J Fisher, ... Biomaterials 24 (3), 469-479, 2003 | 320 | 2003 |
| High cup angle and microseparation increase the wear of hip surface replacements IJ Leslie, S Williams, G Isaac, E Ingham, J Fisher Clinical Orthopaedics and Related Research® 467 (9), 2259-2265, 2009 | 239 | 2009 |
| Friction of total hip replacements with different bearings and loading conditions C Brockett, S Williams, Z Jin, G Isaac, J Fisher Journal of Biomedical Materials Research Part B: Applied Biomaterials: An …, 2007 | 210 | 2007 |
| Tribocorrosion in implants—assessing high carbon and low carbon Co–Cr–Mo alloys by in situ electrochemical measurements Y Yan, A Neville, D Dowson, S Williams Tribology International 39 (12), 1509-1517, 2006 | 180 | 2006 |
| Wear of surface engineered metal-on-metal hip prostheses J Fisher, XQ Hu, TD Stewart, S Williams, JL Tipper, E Ingham, MH Stone, ... Journal of Materials Science: Materials in Medicine 15, 225-235, 2004 | 168 | 2004 |
| Characterisation of wear particles produced by metal on metal and ceramic on metal hip prostheses under standard and microseparation simulation C Brown, S Williams, JL Tipper, J Fisher, E Ingham Journal of Materials Science: Materials in Medicine 18, 819-827, 2007 | 144 | 2007 |
| Tribology and wear of metal-on-metal hip prostheses: influence of cup angle and head position S Williams, I Leslie, G Isaac, Z Jin, E Ingham, J Fisher JBJS 90 (Supplement_3), 111-117, 2008 | 141 | 2008 |
| Isolation and characterization of UHMWPE wear particles down to ten nanometers in size from in vitro hip and knee joint simulators JL Tipper, AL Galvin, S Williams, HMJ McEwen, MH Stone, E Ingham, ... Journal of Biomedical Materials Research Part A: An Official Journal of The …, 2006 | 124 | 2006 |
| An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads J Fisher, XQ Hu, JL Tipper, TD Stewart, S Williams, MH Stone, C Davies, ... Proceedings of the Institution of Mechanical Engineers, Part H: Journal of …, 2002 | 122 | 2002 |
| The 2007 Otto Aufranc Award: ceramic-on-metal hip arthroplasties: a comparative in vitro and in vivo study S Williams, A Schepers, G Isaac, C Hardaker, E Ingham, D van der Jagt, ... Clinical Orthopaedics and Related Research® 465, 23-32, 2007 | 121 | 2007 |
| In vitro analysis of the wear, wear debris and biological activity of surface-engineered coatings for use in metal-on-metal total hip replacements S Williams, JL Tipper, E Ingham, MH Stone, J Fisher Proceedings of the Institution of Mechanical Engineers, Part H: Journal of …, 2003 | 119 | 2003 |
| Effect of bearing size on the long‐term wear, wear debris, and ion levels of large diameter metal‐on‐metal hip replacements—An in vitro study I Leslie, S Williams, C Brown, G Isaac, Z Jin, E Ingham, J Fisher Journal of Biomedical Materials Research Part B: Applied Biomaterials: An …, 2008 | 115 | 2008 |
| Development of computational wear simulation of metal-on-metal hip resurfacing replacements F Liu, I Leslie, S Williams, J Fisher, Z Jin Journal of Biomechanics 41 (3), 686-694, 2008 | 111 | 2008 |
| Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation S Williams, M Butterfield, T Stewart, E Ingham, M Stone, J Fisher Proceedings of the Institution of Mechanical Engineers, Part H: Journal of …, 2003 | 109 | 2003 |
| Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic‐on‐ceramic total hip replacement M Al‐Hajjar, IJ Leslie, J Tipper, S Williams, J Fisher, LM Jennings Journal of Biomedical Materials Research Part B: Applied Biomaterials 95 (2 …, 2010 | 103 | 2010 |
| Wear of 36-mm BIOLOX® delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions M Al-Hajjar, J Fisher, JL Tipper, S Williams, LM Jennings Proceedings of the Institution of Mechanical Engineers, Part H: Journal of …, 2013 | 95 | 2013 |
| Metal-on-metal bearings surfaces: materials, manufacture, design, optimization, and alternatives GH Isaac, J Thompson, S Williams, J Fisher Proceedings of the Institution of Mechanical Engineers, Part H: Journal of …, 2006 | 91 | 2006 |
| Wear of ceramic‐on‐carbon fiber‐reinforced poly‐ether ether ketone hip replacements CL Brockett, G John, S Williams, Z Jin, GH Isaac, J Fisher Journal of Biomedical Materials Research Part B: Applied Biomaterials 100 (6 …, 2012 | 90 | 2012 |
| The influence of clearance on friction, lubrication and squeaking in large diameter metal-on-metal hip replacements CL Brockett, P Harper, S Williams, GH Isaac, RS Dwyer-Joyce, Z Jin, ... Journal of Materials Science: Materials in Medicine 19, 1575-1579, 2008 | 87 | 2008 |
| Effect of swing phase load on metal-on-metal hip lubrication, friction and wear S Williams, D Jalali-Vahid, C Brockett, Z Jin, MH Stone, E Ingham, ... Journal of biomechanics 39 (12), 2274-2281, 2006 | 82 | 2006 |
John FisherEmeritus Professor, University of Leeds在 leeds.ac.uk 的电子邮件经过验证
