| Thermal conductivity of highly porous zirconia B Nait-Ali, K Haberko, H Vesteghem, J Absi, DS Smith Journal of the European Ceramic society 26 (16), 3567-3574, 2006 | 320 | 2006 |
| Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method M Ranjbar-Far, J Absi, G Mariaux, F Dubois Materials & Design 31 (2), 772-781, 2010 | 288 | 2010 |
| Analysis of aerodynamic journal bearings with small number of herringbone grooves by finite element method D Bonneau, J Absi | 122 | 1994 |
| Impact of the non-homogenous temperature distribution and the coatings process modeling on the thermal barrier coatings system M Ranjbar-Far, J Absi, S Shahidi, G Mariaux Materials & Design 32 (2), 728-735, 2011 | 120 | 2011 |
| Crack propagation modeling on the interfaces of thermal barrier coating system with different thickness of the oxide layer and different interface morphologies M Ranjbar-Far, J Absi, G Mariaux, DS Smith Materials & Design 32 (10), 4961-4969, 2011 | 118 | 2011 |
| Potassium geopolymer foams made with silica fume pore forming agent for thermal insulation J Henon, A Alzina, J Absi, DS Smith, S Rossignol Journal of Porous Materials 20, 37-46, 2013 | 105 | 2013 |
| Controlling the reactivity of silicate solutions: A FTIR, Raman and NMR study L Vidal, E Joussein, M Colas, J Cornette, J Sanz, I Sobrados, JL Gelet, ... Colloids and Surfaces A: Physicochemical and Engineering Aspects 503, 101-109, 2016 | 101 | 2016 |
| Finite element modeling of the different failure mechanisms of a plasma sprayed thermal barrier coatings system M Ranjbar-Far, J Absi, G Mariaux Journal of thermal spray technology 21, 1234-1244, 2012 | 87 | 2012 |
| Heterogeneous numerical modeling of asphalt concrete through use of a biphasic approach: Porous matrix/inclusions FF Tehrani, J Absi, F Allou, C Petit Computational Materials Science 69, 186-196, 2013 | 81 | 2013 |
| Effect of residual stresses and prediction of possible failure mechanisms on thermal barrier coating system by finite element method M Ranjbar-Far, J Absi, G Mariaux, S Shahidi Journal of thermal spray technology 19, 1054-1061, 2010 | 74 | 2010 |
| Preparation and thermal conductivity characterisation of highly porous ceramics: comparison between experimental results, analytical calculations and numerical simulations B Nait-Ali, K Haberko, H Vesteghem, J Absi, DS Smith Journal of the European Ceramic Society 27 (2-3), 1345-1350, 2007 | 66 | 2007 |
| Numerical calculations of the thermal conductivity of porous ceramics based on micrographs S Grandjean, J Absi, DS Smith Journal of the European Ceramic Society 26 (13), 2669-2676, 2006 | 65 | 2006 |
| Porosity control of cold consolidated geomaterial foam: temperature effect J Henon, A Alzina, J Absi, DS Smith, S Rossignol Ceramics International 38 (1), 77-84, 2012 | 60 | 2012 |
| Thermal conductivity of pressed powder compacts: tin oxide and alumina C Poulier, DS Smith, J Absi Journal of the European Ceramic Society 27 (2-3), 475-478, 2007 | 60 | 2007 |
| Improved method for severe thermal shocks testing of ceramics by water quenching J Absi, JC Glandus Journal of the European Ceramic Society 24 (9), 2835-2838, 2004 | 60 | 2004 |
| Mixed mode fracture properties characterization for wood by digital images correlation and finite element method coupling M Méité, F Dubois, O Pop, J Absi Engineering Fracture Mechanics 105, 86-100, 2013 | 55 | 2013 |
| Identification algorithm for fracture parameters by combining DIC and FEM approaches O Pop, M Meite, F Dubois, J Absi International journal of fracture 170, 101-114, 2011 | 54 | 2011 |
| Grain-boundary thermal resistance in polycrystalline oxides: alumina, tin oxide, and magnesia DS Smith, S Grandjean, J Absi, S Kadiebu, S Fayette High Temperatures-High Pressures 35 (1), 93-100, 2003 | 48 | 2003 |
| Characterization of timber fracture using the digital image correlation technique and finite element method F Dubois, M Méité, O Pop, J Absi Engineering Fracture Mechanics 96, 107-121, 2012 | 43 | 2012 |
| Characterization of mixed-mode fracture based on a complementary analysis by means of full-field optical and finite element approaches M Méité, O Pop, F Dubois, J Absi International Journal of Fracture 180, 41-52, 2013 | 41 | 2013 |
Fatima Allou在 unilim.fr 的电子邮件经过验证
