| Multi response optimization of powder additive mixed electrical discharge machining by Taguchi analysis P Chaudhury, S Samantaray, S Sahu Materials Today: Proceedings 4 (2), 2231-2241, 2017 | 31 | 2017 |
| Characterization of natural fiber extracted from Bauhinia vahlii bast subjected to different surface treatments: A potential reinforcement in polymer composite S Sahu, SB Sahu, S Nayak, J Mohapatra, SK Khuntia, C Malla, P Samal, ... Journal of Natural Fibers 20 (1), 2162185, 2023 | 12 | 2023 |
| Experimental Investigation on Performance and Emission Characteristics of a Diesel Engine Fuelled with Karanja Oil Methyl Ester Using Additive SK Nayak, S Sahu, S Sahu, P Chaudhry Int. J. Eng. Technol 5 (6), 4988-4994, 2013 | 12 | 2013 |
| Optimization of process parameters of powder additive-mixed electrical discharge machining P Chaudhury, S Samantaray, S Sahu Innovative Design and Development Practices in Aerospace and Automotive …, 2017 | 11 | 2017 |
| Automatic generation control study in two area reheat thermal power system A Pritam, S Sahu, SD Rout, S Ganthia, BP Ganthia IOP Conference Series: Materials Science and Engineering 225 (1), 012223, 2017 | 9 | 2017 |
| Calotropis gigantea bast fiber based epoxy composites for automotive application: An experimental study SB Sahu, S Nayak, S Sahu, MK Roul Polymer Composites 44 (1), 252-260, 2023 | 8 | 2023 |
| Genetic algorithm based direct torque control of VSI fed induction motor drive using MATLAB simulation B Ganthia, S Sahu, S Biswal, A Abhisekh, SK Barik Int. J. Adv. Trends Comput. Sci. Eng 8 (5), 2359-2369, 2019 | 8 | 2019 |
| Influence of Various Surface Treatments on Mechanical, Thermal, Morphological, and Water Absorption Properties of Rattan (Calamus beccarii) Fiber S Sahu, S Nayak, SB Sahu, MK Roul Journal of Natural Fibers 20 (1), 2125924, 2023 | 7 | 2023 |
| Effect of chemical treatment and fiber loading on various properties of Bauhinia vahlii bast fibers/acrylonitrile butadiene styrene composites for automotive body parts S Sahu, SBBPJ Sahu, S Nayak, MK Roul, SK Khuntia Polymer Composites 43 (8), 4909-4918, 2022 | 7 | 2022 |
| Extraction and Characterization of Natural CASCABELA Thevetia Bast Fibers: A Potential Candidate as Reinforcement in Epoxy Composites SBBPJ Sahu, S Nayak, S Sahu, J Mohapatra, SK Khuntia, PK Sahoo, ... Journal of Natural Fibers 20 (2), 2272215, 2023 | 3 | 2023 |
| Mechanical, thermal and microstructural studies of acrylonitrile butadiene styrene reinforced with rattan (Calamus beccarii) fiber composites S Sahu, SB Sahu, S Nayak, MK Roul Polymer Composites 43 (8), 5582-5591, 2022 | 3 | 2022 |
| Life cycle costing of woven poly sacks K Vizayakumar, PKJ Mohapatra, B Adhikari, S Srinivasan, S Sahu, H Das The International Journal of Life Cycle Assessment 7 (3), 182-182, 2002 | 3 | 2002 |
| “Improving Quality with reducing cost” an approach by applying TQM and Outsourcing with their combined impact on automobile OEMs SK Nayak, S Sahu International Journal of Analytical, Experimental and Finite Element …, 2014 | 2 | 2014 |
| Effect of Various Chemical Treatments on Physical, Mechanical, Thermal and Morphological Properties of Calotropis Gigantea Bast Fiber SB Sahu, S Sahu, S Nayak, MK Roul Journal of Natural Fibers 19 (16), 14208-14221, 2022 | 1 | 2022 |
| Mechanical and thermo‐physical properties of Cascabela thevetia–Calotropis gigantean fiber reinforced epoxy based hybrid composites SBBPJ Sahu, S Nayak, S Sahu, MK Roul Polymer Composites 43 (9), 6589-6598, 2022 | 1 | 2022 |
| Finite Element Analysis of Material Removal Rate in Electrical discharge Machining Process and its Comparison with Experiments S Sahu, SK Nayak, S Sahu, P Chaudhury Advanced Materials Research 984, 48-55, 2014 | 1 | 2014 |
| A COMPARISON STUDY OF MATERIAL REMOVAL RATE IN ELECTRICAL DISCHARGE MACHINING PROCESS BY USING FINITE ELEMENT ANALYSIS AND EXPERIMENT A Pritam, S Sahu | | 2015 |
| Investigation on the performance and Emission characteristics Of a diesel engine fuelled with vegetable oil methyl Ester blends and diesel blends SB Sahu, SK Nayak, S Sahu | | |
| レイヤード風 RIB ニットワンピース B CAMO | | |
| Experimental calculation of MRR in EDM and its comparison through Finite Element Analysis S Sahu, S Sahu, A Meher, BB Pani “Technological Advancement in Manufacturing & Processing of New Materials …, 0 | | |
