| Analysis and tests of a dual three-phase 12-slot 10-pole permanent-magnet motor M Barcaro, N Bianchi, F Magnussen IEEE Transactions on Industry Applications 46 (6), 2355-2362, 2010 | 242 | 2010 |
| Permanent-magnet optimization in permanent-magnet-assisted synchronous reluctance motor for a wide constant-power speed range M Barcaro, N Bianchi, F Magnussen IEEE Transactions on Industrial Electronics 59 (6), 2495-2502, 2011 | 228 | 2011 |
| Faulty operations of a PM fractional-slot machine with a dual three-phase winding M Barcaro, N Bianchi, F Magnussen IEEE Transactions on Industrial Electronics 58 (9), 3825-3832, 2010 | 184 | 2010 |
| Six-phase supply feasibility using a PM fractional-slot dual winding machine M Barcaro, N Bianchi, F Magnussen 2010 IEEE Energy Conversion Congress and Exposition, 1058-1065, 2010 | 151 | 2010 |
| Interior PM machines using ferrite to replace rare-earth surface PM machines M Barcaro, N Bianchi IEEE Transactions on Industry Applications 50 (2), 979-985, 2013 | 146 | 2013 |
| Design of a low torque ripple fractional-slot interior permanent magnet motor L Alberti, M Barcaro, N Bianchi 2012 IEEE energy conversion congress and exposition (ECCE), 509-516, 2012 | 117 | 2012 |
| Rotor flux-barrier geometry design to reduce stator iron losses in synchronous IPM motors under FW operations M Barcaro, N Bianchi, F Magnussen IEEE Transactions on Industry Applications 46 (5), 1950-1958, 2010 | 96 | 2010 |
| Optimization of interior PM motors with machaon rotor flux barriers P Alotto, M Barcaro, N Bianchi, M Guarnieri IEEE Transactions on Magnetics 47 (5), 958-961, 2010 | 94 | 2010 |
| Structural analysis of the interior PM rotor considering both static and fatigue loading M Barcaro, G Meneghetti, N Bianchi IEEE Transactions on Industry Applications 50 (1), 253-260, 2013 | 83 | 2013 |
| Interior PM machines using ferrite to substitute rare-earth surface PM machines M Barcaro, N Bianchi 2012 XXth International Conference on Electrical Machines, 1339-1345, 2012 | 73 | 2012 |
| IPM machine drive design and tests for an integrated starter–alternator application L Alberti, M Barcaro, M Dai Pré, A Faggion, L Sgarbossa, N Bianchi, ... IEEE Transactions on Industry Applications 46 (3), 993-1001, 2010 | 71 | 2010 |
| Sensorless rotor position detection capability of a dual three-phase fractional-slot IPM machine M Barcaro, A Faggion, N Bianchi, S Bolognani IEEE Transactions on Industry Applications 48 (6), 2068-2078, 2012 | 62 | 2012 |
| PM motors for hybrid electric vehicles M Barcaro, N Bianchi, F Magnussen 2008 43rd International universities power engineering conference, 1-5, 2008 | 61 | 2008 |
| Torque ripple reduction in fractional-slot interior PM machines optimizing the flux-barrier geometries M Barcaro, N Bianchi 2012 XXth International Conference on Electrical Machines, 1496-1502, 2012 | 49 | 2012 |
| Remarks on torque estimation accuracy in fractional-slot permanent-magnet motors M Barcaro, N Bianchi, F Magnussen IEEE Transactions on Industrial Electronics 59 (6), 2565-2572, 2011 | 47 | 2011 |
| Iron saturation impact on high frequency sensorless control of synchronous permanent magnets motor M Barcaro, M Morandin, T Pradella, N Bianchi, I Furlan 2016 XXII International Conference on Electrical Machines (ICEM), 1085-1091, 2016 | 44 | 2016 |
| Air-gap flux density distortion and iron losses in anisotropic synchronous motors M Barcaro, N Bianchi IEEE Transactions on magnetics 46 (1), 121-126, 2009 | 41 | 2009 |
| Low‐torque ripple design of a ferrite‐assisted synchronous reluctance motor M Barcaro, T Pradella, I Furlan IET Electric Power Applications 10 (5), 319-329, 2016 | 38 | 2016 |
| Design considerations to maximize performance of an IPM motor for a wide flux-weakening region M Barcaro, N Bianchi, F Magnussen The XIX International Conference on Electrical Machines-ICEM 2010, 1-7, 2010 | 34 | 2010 |
| Design and analysis of interior permanent magnet synchronous machines for electric vehicles M Barcaro Università degli studi di Padova, 2011 | 33 | 2011 |
