| Experimental study of hole-flanging by single-stage incremental sheet forming M Borrego, D Morales-Palma, AJ Martínez-Donaire, G Centeno, ... Journal of Materials Processing Technology 237, 320-330, 2016 | 86 | 2016 |
| A study to predict failure in biaxially stretched sheets of aluminum alloy 2024-T3 C Vallellano, D Morales, FJ García-Lomas Materials and Manufacturing Processes 23 (3), 303-310, 2008 | 58 | 2008 |
| Assessment of the effect of the through-thickness strain/stress gradient on the formability of stretch-bend metal sheets D Morales-Palma, C Vallellano, FJ García-Lomas Materials & Design 50, 798-809, 2013 | 55 | 2013 |
| Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF AJ Martínez-Donaire, M Borrego, D Morales-Palma, G Centeno, ... International Journal of Mechanical Sciences 151, 76-84, 2019 | 54 | 2019 |
| Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming G Centeno, I Bagudanch, D Morales-Palma, ML Garcia-Romeu, ... Procedia Engineering 183, 180-187, 2017 | 52 | 2017 |
| Novel experimental techniques for the determination of the forming limits at necking and fracture G Centeno, AJ Martínez-Donaire, D Morales-Palma, C Vallellano, ... Materials Forming and Machining, 1-24, 2015 | 38 | 2015 |
| Experimental study on the evaluation of necking and fracture strains in sheet metal forming processes G Centeno, AJ Martínez-Donaire, C Vallellano, LH Martínez-Palmeth, ... Procedia Engineering 63, 650-658, 2013 | 36 | 2013 |
| Preliminary ontology definition for aerospace assembly lines in Airbus using Models for Manufacturing methodology F Mas, J Racero, M Oliva, D Morales-Palma Procedia Manufacturing 28, 207-213, 2019 | 33 | 2019 |
| A functional methodology on the manufacturing of customized polymeric cranial prostheses from CAT using SPIF G Centeno, D Morales-Palma, B Gonzalez-Perez-Somarriba, ... Rapid Prototyping Journal 23 (4), 771-780, 2017 | 33 | 2017 |
| On the use of Concave-Side Rule and Critical-Distance Methods to predict the influence of bending on sheet-metal formability C Vallellano, D Morales, AJ Martinez, FJ García-Lomas International Journal of Material Forming 3 (1), 1167-1170, 2010 | 32 | 2010 |
| A preliminary methodological approach to Models for Manufacturing (MfM) F Mas, J Racero, M Oliva, D Morales-Palma IFIP International Conference on Product Lifecycle Management, 273-283, 2018 | 31 | 2018 |
| Revisiting formability and failure of AISI304 sheets in SPIF: Experimental approach and numerical validation G Centeno, AJ Martínez-Donaire, I Bagudanch, D Morales-Palma, ... Metals 7 (12), 531, 2017 | 29 | 2017 |
| Optimization of hole-flanging by single point incremental forming in two stages D Morales-Palma, M Borrego, AJ Martínez-Donaire, G Centeno, ... Materials 11 (10), 2029, 2018 | 26 | 2018 |
| Stretch-flanging of AA2024-T3 sheet by single-stage SPIF JA López-Fernández, G Centeno, AJ Martínez-Donaire, D Morales-Palma, ... Thin-Walled Structures 160, 107338, 2021 | 25 | 2021 |
| Recent approaches for the determination of forming limits by necking and fracture in sheet metal forming MB Silva, AJ Martínez-Donaire, G Centeno, D Morales-Palma, ... Procedia engineering 132, 342-349, 2015 | 24 | 2015 |
| Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC M Borrego, D Morales-Palma, AJ Martínez-Donaire, G Centeno, ... International Journal of Material Forming 13 (2), 303-316, 2020 | 22 | 2020 |
| On the study of the single-stage hole-flanging process by SPIF M Borrego, D Morales-Palma, AJ Martínez-Donaire, G Centeno, ... Procedia engineering 132, 290-297, 2015 | 22 | 2015 |
| On the use of maximum force criteria to predict localised necking in metal sheets under stretch-bending D Morales-Palma, AJ Martínez-Donaire, C Vallellano Metals 7 (11), 469, 2017 | 18 | 2017 |
| Experimental detection of necking in stretch-bending conditions: a critical review and new methodology AJ Martinez-Donaire, C Vallellano, D Morales, FJ Garcia-Lomas Steel Research International 81 (9), 785-788, 2010 | 17 | 2010 |
| Bending effect in the failure of stretch-bend metal sheets D Morales, A Martinez, C Vallellano, FJ García-Lomas International Journal of Material Forming 2 (1), 813-816, 2009 | 17 | 2009 |
Carpóforo VallellanoFull Professor - Universidad de Sevilla在 us.es 的电子邮件经过验证
