Experimental study of oil cooling systems for electric motors T Davin, J Pellé, S Harmand, R Yu Applied Thermal Engineering 75, 1-13, 2015 | 215 | 2015 |
Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet S Harmand, J Pellé, S Poncet, IV Shevchuk International Journal of Thermal Sciences 67, 1-30, 2013 | 125 | 2013 |
Multiphysics modeling: Electro-vibro-acoustics and heat transfer of PWM-fed induction machines J Le Besnerais, A Fasquelle, M Hecquet, J Pelle, V Lanfranchi, ... IEEE Transactions on Industrial Electronics 57 (4), 1279-1287, 2009 | 93 | 2009 |
Heat transfer measurements in an opened rotor–stator system air-gap J Pellé, S Harmand Experimental thermal and fluid science 31 (3), 165-180, 2007 | 90 | 2007 |
Transient thermal and hydrodynamic models of a flat heat pipe for the cooling of electronic components R Sonan, J Pelle, D Leger, M Fakes Proceedings of CHT-08 ICHMT International Symposium on Advances in …, 2008 | 86 | 2008 |
Heat transfer study in a rotor–stator system air-gap with an axial inflow J Pellé, S Harmand Applied Thermal Engineering 29 (8-9), 1532-1543, 2009 | 78 | 2009 |
Thermal optimization of a high-power salient-pole electrical machine AS Bornschlegell, J Pelle, S Harmand, A Fasquelle, JP Corriou IEEE Transactions on Industrial Electronics 60 (5), 1734-1746, 2012 | 64 | 2012 |
Numerical study of convective heat transfer enhancement in a pipe rotating around a parallel axis A Fasquelle, J Pellé, S Harmand, IV Shevchuk Journal of heat transfer 136 (5), 051901, 2014 | 60 | 2014 |
PIV measurements of an air jet impinging on an open rotor-stator system TD Nguyen, J Pellé, S Harmand, S Poncet Experiments in fluids 53 (2), 401-412, 2012 | 49 | 2012 |
Multiphysics modeling: electro-vibro-acoustics and heat transfer of induction machines J Le Besnerais, A Fasquelle, M Hecquet, J Pellé, V Lanfranchi, ... 2008 18th International Conference on Electrical Machines, 1-6, 2008 | 22 | 2008 |
Thermal optimization of a single inlet T-junction AS Bornschlegell, J Pelle, S Harmand, A Bekrar, S Chaabane, ... International Journal of Thermal Sciences 53, 108-118, 2012 | 19 | 2012 |
Motor cooling modelling: An inverse method for the identification of convection coefficients T Davin, J Pellé, S Harmand, R Yu Journal of Thermal Science and Engineering Applications, 2017 | 18 | 2017 |
Turbulent impinging jet flow into an unshrouded rotor–stator system: Hydrodynamics and heat transfer S Poncet, TD Nguyen, S Harmand, J Pellé, R Da Soghe, C Bianchini, ... International Journal of Heat and Fluid Flow 44, 719-734, 2013 | 18 | 2013 |
Heat transfer study in a discoidal system: the influence of rotation and space between disks J Pellé, S Harmand International journal of heat and mass transfer 51 (13-14), 3298-3308, 2008 | 15 | 2008 |
Mechanical modelling of microwave sintering and experimental validation on an alumina powder M Renaux, D Méresse, J Pellé, A Thuault, C Morin, C Nivot, C Courtois Journal of the European Ceramic Society 41 (13), 6617-6625, 2021 | 13 | 2021 |
Mock-up study of the effect of wall distance on the thermal rating of power cables in ventilated tunnels F Boukrouche, C Moreau, J Pellé, F Beaubert, S Harmand, O Moreau IEEE Transactions on Power Delivery 32 (6), 2453-2461, 2016 | 12 | 2016 |
Convective heat transfer in a rotor stator system air gap with multiple suctions of fluid through the stator J Pellé, S Harmand | 11 | 2011 |
Heat transfer study in a discoidal system: The influence of an impinging jet and rotation J Pellé, S Harmand Experimental heat transfer 20 (4), 337-358, 2007 | 8 | 2007 |
Study of heat transfer in a rotor-stator system: impinging jet and spacing influence J Pelle Journal of Enhanced Heat Transfer 13 (4), 2006 | 6 | 2006 |
A thermal study of power cables cooling in tunnels F Boukrouche, C Moreau, S Harmand, F Beaubert, J Pellé, O Moreau Journal of Physics: Conference Series 745 (3), 032032, 2016 | 4 | 2016 |