| Simulation on cooling performance characteristics of a refrigerant-cooled active thermal management system for lithium ion batteries S Park, DS Jang, DC Lee, SH Hong, Y Kim International Journal of Heat and Mass Transfer 135, 131-141, 2019 | 86 | 2019 |
| Evaporation heat transfer coefficient and pressure drop of R-1233zd (E) in a brazed plate heat exchanger DC Lee, D Kim, S Park, J Lim, Y Kim Applied Thermal Engineering 130, 1147-1155, 2018 | 67 | 2018 |
| Heat transfer and stress characteristics of additive manufactured FCCZ lattice channel using thermal fluid-structure interaction model S Yun, J Kwon, DC Lee, HH Shin, Y Kim International Journal of Heat and Mass Transfer 149, 119187, 2020 | 53 | 2020 |
| Comparative evaluation of flow boiling heat transfer characteristics of R-1234ze (E) and R-134a in plate heat exchangers with different Chevron angles D Kim, DC Lee, DS Jang, Y Jeon, Y Kim Applied Thermal Engineering 132, 719-729, 2018 | 44 | 2018 |
| Performance improvement of solar-assisted ground-source heat pumps with parallelly connected heat sources in heating-dominated areas M Lee, D Lee, MH Park, YT Kang, Y Kim Energy 240, 122807, 2022 | 38 | 2022 |
| Condensation heat transfer characteristics of R245fa in a shell and plate heat exchanger for high-temperature heat pumps J Lim, KS Song, D Kim, DC Lee, Y Kim International Journal of Heat and Mass Transfer 127, 730-739, 2018 | 37 | 2018 |
| Performance improvement of hot stamping die for patchwork blank using mixed cooling channel designs with straight and conformal channels S Yun, J Kwon, W Cho, DC Lee, Y Kim Applied Thermal Engineering 165, 114562, 2020 | 32 | 2020 |
| Heating performance of a coolant-source heat pump using waste heat from stack and electric devices in fuel cell electric vehicles under cold conditions H Lee, D Lee, Y Kim Energy Conversion and Management 252, 115092, 2022 | 29 | 2022 |
| Comparative evaluation of the evaporation heat transfer characteristics of a low-GWP refrigerant R-1234ze (E) between shell-and-plate and plate heat exchangers CU Jo, DC Lee, HJ Chung, Y Kang, Y Kim International Journal of Heat and Mass Transfer 153, 119598, 2020 | 28 | 2020 |
| Numerical analysis on thermo-fluid–structural performance of graded lattice channels produced by metal additive manufacturing S Yun, DC Lee, DS Jang, M Lee, Y Kim Applied Thermal Engineering 193, 117024, 2021 | 27 | 2021 |
| Two-phase flow patterns and pressure drop of a low GWP refrigerant R-1234ze (E) in a plate heat exchanger under adiabatic conditions DC Lee, D Kim, S Yun, Y Kim International Journal of Heat and Mass Transfer 145, 118816, 2019 | 25 | 2019 |
| Effects of compressor frequency and heat exchanger geometry on dynamic performance characteristics of heat pump dryers JY Choi, DC Lee, MH Park, Y Lee, Y Kim Energy 235, 121391, 2021 | 24 | 2021 |
| Performance comparison of heat pumps using low global warming potential refrigerants with optimized heat exchanger designs B Kim, SH Lee, DC Lee, Y Kim Applied Thermal Engineering 171, 114990, 2020 | 24 | 2020 |
| Evaporation heat transfer and pressure drop characteristics of R1234ze (E)/R32 as a function of composition ratio in a brazed plate heat exchanger DC Lee, D Kim, W Cho, Y Kim International Journal of Heat and Mass Transfer 140, 216-226, 2019 | 23 | 2019 |
| Evaporation heat transfer characteristics of R-245fa in a shell and plate heat exchanger for very-high-temperature heat pumps KS Song, S Yun, DC Lee, K Kim, Y Kim International Journal of Heat and Mass Transfer 151, 119408, 2020 | 22 | 2020 |
| Heat transfer and pressure drop characteristics of R1234yf during evaporation in a plate heat exchanger with offset strip fins: An experimental study R Prabakaran, M Salman, PG Kumar, D Lee, SC Kim International Journal of Heat and Mass Transfer 194, 123091, 2022 | 20 | 2022 |
| Performance of a two-phase injection heat pump with the variation of injection quality and pressure BG Kim, D Kim, D Lee, Y Kim International Journal of Air-Conditioning and Refrigeration 25 (02), 1750018, 2017 | 20 | 2017 |
| Flow patterns and heat transfer characteristics of R-1234ze (E) for downward condensation in a plate heat exchanger DC Lee, S Yun, JY Choi, Y Kim International Journal of Heat and Mass Transfer 175, 121373, 2021 | 18 | 2021 |
| Optimization of motive nozzle position in a modified two-phase ejector expansion household refrigeration cycle using an artificial neural network Y Jeon, D Lee, H Cho Energy Reports 8, 1114-1123, 2022 | 17 | 2022 |
| Performance assessment of optimized heat pump water heaters using low-GWP refrigerants for high-and low-temperature applications B Kim, DC Lee, SH Lee, Y Kim Applied Thermal Engineering 181, 115954, 2020 | 15 | 2020 |
Yongchan KimKorea University在 korea.ac.kr 的电子邮件经过验证
