| Mode I fracture toughness of fiber-reinforced polymer composites: A review A Siddique, S Abid, F Shafiq, Y Nawab, H Wang, B Shi, S Saleemi, B Sun Journal of Industrial Textiles 50 (8), 1165-1192, 2021 | 62 | 2021 |
| High-speed visualizing and mesoscale modeling for deformation and damage of 3D angle-interlock woven composites subjected to transverse impacts C Ren, T Liu, A Siddique, B Sun, B Gu International Journal of Mechanical Sciences 140, 119-132, 2018 | 46 | 2018 |
| A review of joining techniques for thermoplastic composite materials A Siddique, Z Iqbal, Y Nawab, K Shaker Journal of Thermoplastic Composite Materials 36 (8), 3417-3454, 2023 | 38 | 2023 |
| Numerical analysis of thermal expansion behaviors and interfacial thermal stress of 3D braided composite materials H Wang, M Cao, A Siddique, B Sun, B Gu Computational Materials Science 138, 77-91, 2017 | 34 | 2017 |
| Extraction of natural dye from aerial parts of argy wormwood based on optimized taguchi approach and functional finishing of cotton fabric F Shafiq, A Siddique, MN Pervez, MM Hassan, V Naddeo, Y Cai, A Hou, ... Materials 14 (19), 5850, 2021 | 33 | 2021 |
| Drop-weight impact behaviors of 3-D angle interlock woven composites after thermal oxidative aging M Wang, M Cao, H Wang, A Siddique, B Gu, B Sun Composite Structures 166, 239-255, 2017 | 33 | 2017 |
| Fabrication and chemo-physical characterization of CuO/chitosan nanocomposite-mediated tricomponent PVA films M Aslam, ZA Raza, A Siddique Polymer Bulletin 78 (4), 1955-1965, 2021 | 27 | 2021 |
| Performance evaluation of jute/glass-fiber-reinforced Polybutylene Succinate (PBS) hybrid composites with different layering configurations MU Ghani, A Siddique, KG Abraha, L Yao, W Li, MQ Khan, IS Kim Materials 15 (3), 1055, 2022 | 26 | 2022 |
| Numerical analyses on thermal stress distribution induced from impact compression in 3D carbon fiber/epoxy braided composite materials S Liu, B Shi, A Siddique, Y Du, B Sun, B Gu Journal of thermal stresses 41 (7), 903-919, 2018 | 22 | 2018 |
| Structural influences of two-dimensional and three-dimensional carbon/epoxy composites on mode I fracture toughness behaviors with rate effects on damage evolution A Siddique, B Sun, B Gu Journal of Industrial Textiles 50 (1), 23-45, 2020 | 18 | 2020 |
| Simultaneous fixation of wrinkle-free finish and reactive dye on cotton using response surface methodology S Abid, T Hussain, A Nazir, ZA Raza, A Siddique, A Azeem, S Riaz Clothing and Textiles Research Journal 36 (2), 119-132, 2018 | 17 | 2018 |
| Response surface optimization in discharge printing of denim using potassium permanganate as oxidative agent A Siddique, T Hussain, W Ibrahim, ZA Raza, S Abid, A Nazir Clothing and Textiles Research Journal 35 (3), 204-214, 2017 | 16 | 2017 |
| Effect of braiding angle on dynamic mechanical properties of 3-D braided rectangular composites under multiple impact compressions X Gao, A Siddique, B Sun, B Gu Journal of Composite Materials 53 (13), 1827-1846, 2019 | 14 | 2019 |
| Impact fracture behaviors of three-dimensional braided composite U-notch beam subjected to three-point bending B Shi, S Liu, A Siddique, Y Du, B Sun, B Gu International Journal of Damage Mechanics 28 (3), 404-426, 2019 | 14 | 2019 |
| Mode I fatigue of fibre reinforced polymeric composites: a review X Gao, M Umair, Y Nawab, Z Latif, S Ahmad, A Siddique, H Yang Polymers 14 (21), 4558, 2022 | 13 | 2022 |
| Comparisons on impact fracture behavior between three-dimensional four directional and five directional braided composite materials B Shi, S Liu, A Siddique, J Zhang, B Gu, B Sun International Journal of Damage Mechanics 28 (7), 990-1020, 2019 | 13 | 2019 |
| Finite element modeling on fracture toughness of 3D angle-interlock woven carbon/epoxy composites at microstructure level A Siddique, B Sun, B Gu Mechanics of Advanced Materials and Structures 28 (8), 849-860, 2021 | 12 | 2021 |
| Influence of braiding angle on multiple impact damages of 3-D braided composite along longitudinal direction X Gao, A Siddique, B Sun, B Gu Applied Composite Materials 26, 1261-1280, 2019 | 12 | 2019 |
| Optimization of discharge printing of indigo denim using potassium permanganate via response surface regression A Siddique, T Hussain, W Ibrahim, ZA Raza, S Abid Pigment & Resin Technology 47 (3), 228-235, 2018 | 12 | 2018 |
| Eco‐friendly dyeing of cotton using waste‐derived natural dyes and mordants F Nazir, A Siddique, A Nazir, S Javed, T Hussain, S Abid Coloration Technology 138 (6), 684-692, 2022 | 11 | 2022 |
