… In the paper we present selected parts of our investigation on the electromagnetic coil-type
MAVs … an EML laboratory stand. Finally, we presented results of preliminary laboratory tests. …

… direct–flow boiler of the coil type is a difficult process, and therefore a training laboratory
stand was designed to study the hydraulic and aerodynamic systems of this type of boiler. The …

… Tht 600/110-cfm blower/pump unit is used tojiack the for the coils, test stand, and vapor-cooled …
Data is continuously inertia type to allow a safe discharge- of the coil taken and stored at …

… coil type with a steam capacity of 2000 kg/h is taken as the basis for the design of the
laboratory stand… The laboratory stand uses pipes bent along a helical line—a coil. A centrifugal …

… stand structure to 5 K to minimize heat conduction to the coils… thermal inertia type to allow
a safe discharge of the coil if the … a laboratory), the single test coil, and a future laboratory test …

… The first step in the design was the creation of a geometric model of a laboratory stand
simulating a furnace chamber of a steam boiler of a coil type. Two variations of it were created, in …

… This paper describes the various single-coil and six-coil array tests to … There are more than
900 sensors for the test stand and re… type tests were done one after the other for all six coils. …

… a typical bench-type oscilloscope (… coil-series was clamped to a lab bench using a retort
stand with the bottom of the inner pipe touching the ground. The position of each individual coil …

… Ridge National Laboratory (ORNL), was to have three industrial teams design and build test
coils (… and system development, the coils and tent stand are highly instrumented. Each test …

… one coil and shipped it to the Oak Ridge National Laboratory (… The entire test stand, test
coils, and pulse coils are enclosed … this type of behavior was repeated at different charges. This …