… In general, laboratory Rogowski coils … In stand results indicated that a coil made for this
application all cases … Furthermore, coils with this standard type of construction were found to …

Aflat induction coil, suited to the measurement of magnetic fields in narrow gaps, can be … , D,
placed at the edge of a rectangle, The coil is wound by pulling a convenient wire through the …

… Subsequently, we stacked the coils so that the small-I c coils could be observed near the
center of … The stand-alone test of the LTS coil was successfully performed. Although we were …

… The designed and developed laboratory test-rig is prepared … The main goal of this laboratory
test-rig is investigation of the … using floating point data type and executing them in the FPU. …

… coil system, which is a useful in laboratory techniques, is normally used to generate magnetic
field levels of specified volume and uniformity. These coils … to as the test stand, which is …

… Laboratory tests were carried out on the laboratory stand shown in Fig. 1. … Laboratory stand
The laboratory stand consists of a power amplifier, a generator RIGOL RG−DG1022, and a …

… Microthruster developed in our laboratory has a very low … V, thrust stand performance
data are presented using the coil … When this type of force is applied to the thrust stand, the …

… coil support structure is to provide a structural environment similar to that of future tokamaks.
The structure must also be adaptable to different configurations of one to six test coils. … coil …

… The technique proposed in this paper is experimentally verified in the laboratory on a 2.2-kW,
415-V, 50-Hz, fourpole, star-connected three-phase SCIM specifically wound with OCs. …