… The DNP3 protocol is modelled in [6] using ns-2 software, while in this paper we carry out
the modelling of DNP3 in a substation grid using OPNET. A split protocol design can be used …

… on Distributed Network Protocol (DNP3) communication which is used in the smart grid to …
aspect where the distribution substation connected to customer substation where at this state, …

… IEC 61850 has been used as a standard protocol of communication in smart grids and for
substation automation functions. It has a System Configuration Language (SCL), abstract …

… 11] by evaluating the performance of DNP3 in a smart grid scenario composed of both wired
… the substations of distribution of electric power to the control center. The substations are …

… substations and distribution networks are key element of smart grid, however not all substations
… The results of this work are expected to provide a mapping procedure between DNP3 …

… with DNP3 is a communication protocol and viable for low cost smart grid applications for …
The outstation is devices located in the field (transmission line, substations, transformers) in …

… DNP3 as a network protocol has been designed to work well over narrow bandwidth …
substation automation and smart grid, enhancements like the WITS add-on to DNP3, gave DNP3 …

… 2 is being illustrating a system of power distribution grid with four substations and four … that
is connected to the substation A which is consuming electrical power is shown in yellow color. …

… substations utilizing the DNP3 protocol. This work primarily focuses … DNP3 since it is the
most widely used protocol in power substations which form the backbone of the electricity grid…

… DNP3 is an industrial control protocol typically used in the electric power sector… grid. The
prototype was tested on a scaled-down electric power substation which runs the DNP3 protocol …