The phase diagrams and thermodynamics of the complex systems are of great importance
for the materials development and processing optimisation. The Calphad method is a …

The Ti-Al-Fe-V quaternary system is a very useful system for titanium alloy development.
However, there are few reports on the thermodynamic description of this system. In the …

The Ti–Al–Cr–Mn system is a potentially useful system for lower cost titanium alloy
development; however, there are few reports about the experimental phase diagrams and …

Glassy or amorphous alloys form over a wide composition range in the Nb-Ni-Ti and Nb-Ni-
Zr systems. 1, 2) These amorphous alloys are expected to act as a membrane material for …

The sub-binary systems Al-Ti, Ti-V, and Al-V are reviewed and adopted from the previous
assessments, the thermodynamic analysis of the Al-Ti-V ternary system is performed by the …

Aeronautical jet engine applications require turbine blade materials that are light weight and
exhibit good high-temperature mechanical properties. Single-crystal Ni-based super alloys …

The Ti–Al–Mn ternary system is one of the most important systems in the development of low
cost titanium alloys. Although several experimental data of this ternary system are available …

Phase equilibria of the Al–Ni–Sc system were investigated by combination of key
experiments and thermodynamic modeling. The isothermal sections of the Al–Ni–Sc ternary …

The thermodynamic description of the binary system Al–Ti is obtained by modelling the
Gibbs energy of all individual phases using the CALPHAD approach. The model parameters …

The Calphad method is very important method for the modelling of thermodynamic
properties and phase diagrams of multicomponent systems. The method is based on a semi …