A thermodynamic re-assessment of Al–V toward an assessment of the ternary Al–Ti–V system
Titanium alloys are highly sought after due to their excellent mechanical properties. One of
the most commonly used Ti alloys is Ti–6Al–4V, which contains 6% Al and 4% V by weight …
the most commonly used Ti alloys is Ti–6Al–4V, which contains 6% Al and 4% V by weight …
[HTML][HTML] Thermodynamic Assessment of Ti-Al-Fe-V Quaternary System Applied to Novel Titanium Alloys Designing
Q Feng, B Duan, L Mao, L Jiao, G Chen, X Lu, C Li - Metals, 2022 - mdpi.com
The Ti-Al-Fe-V quaternary system is a very useful system for titanium alloy development.
However, there are few reports on the thermodynamic description of this system. In the …
However, there are few reports on the thermodynamic description of this system. In the …
Thermodynamic modeling of the Al-Ti-V ternary system
X Lu, N Gui, A Qiu, G Wu, C Li - Metallurgical and Materials Transactions …, 2014 - Springer
The sub-binary systems Al-Ti, Ti-V, and Al-V are reviewed and adopted from the previous
assessments, the thermodynamic analysis of the Al-Ti-V ternary system is performed by the …
assessments, the thermodynamic analysis of the Al-Ti-V ternary system is performed by the …
Thermodynamic re-modelling of the ternary Al–Cr–Ti system with refined Al–Cr description
VT Witusiewicz, AA Bondar, U Hecht… - Journal of Alloys and …, 2015 - Elsevier
In the present paper, the ternary Al–Cr–Ti and binary constituent Al–Cr systems are
thermodynamically re-modelled based on new experimental information reported in the …
thermodynamically re-modelled based on new experimental information reported in the …
Thermodynamic modeling of the Ti–Al–Cr ternary system
LY Chen, AT Qiu, LJ Liu, M Jiang, XG Lu… - Journal of Alloys and …, 2011 - Elsevier
The Ti–Al–Cr ternary system is one of the most important systems to studying the titanium
alloys. Some experimental data of this ternary system are available and a few partial …
alloys. Some experimental data of this ternary system are available and a few partial …
Calculation of phase equilibria in Ti–Al–Mn ternary system involving a new ternary intermetallic compound
CH Li, AT Qiu, XG Lu, WZ Ding, QD Zhong - Intermetallics, 2010 - Elsevier
The Ti–Al–Mn ternary system is one of the most important systems in the development of low
cost titanium alloys. Although several experimental data of this ternary system are available …
cost titanium alloys. Although several experimental data of this ternary system are available …
Calculation of phase equilibria in Ti–Al–Cr–Mn quaternary system for developing lower cost titanium alloys
XG Lu, CH Li, LY Chen, AT Qiu, WZ Ding - Materials Chemistry and Physics, 2011 - Elsevier
The Ti–Al–Cr–Mn system is a potentially useful system for lower cost titanium alloy
development; however, there are few reports about the experimental phase diagrams and …
development; however, there are few reports about the experimental phase diagrams and …
Thermodynamic modeling of the Al–Nb–V system
In the present work, the Al–Nb–V ternary system was thermodynamically modeled using the
compound energy formalism (CEF) within the framework of the CALPHAD method and …
compound energy formalism (CEF) within the framework of the CALPHAD method and …
Experimental study and thermodynamic modelling of the ternary Al–Ta–Ti system
VT Witusiewicz, AA Bondar, U Hecht, VM Voblikov… - Intermetallics, 2011 - Elsevier
In the present paper a thermodynamic description of the entire ternary Al–Ta–Ti system is
proposed, being obtained by CALPHAD modelling. Dedicated experiments were performed …
proposed, being obtained by CALPHAD modelling. Dedicated experiments were performed …
CALPHAD modeling and experimental assessment of Ti-Al-Mn ternary system
There is an increasing need to develop lower cost titanium alloys. In this investigation, Ti-Al-
Mn ternary alloy system was experimentally and computationally investigated using …
Mn ternary alloy system was experimentally and computationally investigated using …