Thermodynamic reassessment of Nb-Ni-Ti system with order–disorder model
A thermodynamic description of the Nb-Ni-Ti system is refined by combining results of first-
principle total energy calculations with the CALPHAD approach. The lower order binary …
principle total energy calculations with the CALPHAD approach. The lower order binary …
Thermodynamic assessment of the Ta–Ge system supported by ab initio calculations
Abstract The Ta–Ge system was thermodynamically modeled for the first time using the
CALPHAD method incorporating both literature-derived phase equilibria data and new …
CALPHAD method incorporating both literature-derived phase equilibria data and new …
Quantitative Analysis of Phase Composition of Alloy TNM-B1 based on TiAl(γ) Titanium Aluminide
NA Belov, IS Chupakhin - Metal Science and Heat Treatment, 2014 - Springer
The Thermo-Calc software is used to design isothermal and polythermal sections of the Ti–
Al–Nb–Mo system as applied to a standard TNM-B 1 γ-alloy based on TiAl intermetallic. It is …
Al–Nb–Mo system as applied to a standard TNM-B 1 γ-alloy based on TiAl intermetallic. It is …
Experimental investigation and thermodynamic modeling of the Ni–Ti–C system
Y Du, JC Schuster - International Journal of Materials Research, 2021 - degruyter.com
Abstract The Ni–Ti–C ternary phase diagram is constructed via two steps. In the first step, all
of the experimental phase diagram data available from the literature were critically reviewed …
of the experimental phase diagram data available from the literature were critically reviewed …
An ab initio study on stacking and stability of TiAl3 phases
TiAl 3 persists in many Al alloys and plays a detrimental role in solidification of related melts.
Knowledge about TiAl 3 phases and phase relations is of importance to get some insight …
Knowledge about TiAl 3 phases and phase relations is of importance to get some insight …
β Phase decomposition in Ti–5Al–5Mo–5V–3Cr
The decomposition of the β phase during rapid cooling of the near β titanium alloy Ti–5Al–
5Mo–5V–3Cr has been studied using in situ X-ray synchrotron diffraction combined with ex …
5Mo–5V–3Cr has been studied using in situ X-ray synchrotron diffraction combined with ex …
Intermetallic titanium aluminides in aerospace applications–processing, microstructure and properties
H Clemens, S Mayer - Materials at high temperatures, 2016 - Taylor & Francis
After more than 30 years of fundamental research and development activities intermetallic
titanium aluminides based on the ordered γ-TiAl phase have found applications in …
titanium aluminides based on the ordered γ-TiAl phase have found applications in …
Optimization of low-cost Ti-35421 titanium alloy: phase transformation, bimodal microstructure, and combinatorial mechanical properties
A sophisticated understanding of phase transformations and microstructure evolution is
crucial in mechanical property optimization for the newly developed low-cost Ti-35421 (Ti …
crucial in mechanical property optimization for the newly developed low-cost Ti-35421 (Ti …
Al-Ti-V (aluminum-titanium-vanadium)
V Raghavan - Journal of phase equilibria and diffusion, 2012 - Springer
The previous review of this ternary system by [1995Hay] presented a schematic liquidus
projection, a partial reaction scheme, isothermal sections at 1400, 1200, 1100, 1000 and …
projection, a partial reaction scheme, isothermal sections at 1400, 1200, 1100, 1000 and …
Thermal expansion of a multiphase intermetallic Ti-Al-Nb-Mo alloy studied by high-energy X-ray diffraction
P Staron, A Stark, N Schell, P Spoerk-Erdely… - Materials, 2021 - mdpi.com
Intermetallic γ-TiAl-based alloys are lightweight materials for high-temperature applications,
eg, in the aerospace and automotive industries. They can replace much heavier Ni-based …
eg, in the aerospace and automotive industries. They can replace much heavier Ni-based …