The Ti–Al–Cr–Mn system is a potentially useful system for lower cost titanium alloy
development; however, there are few reports about the experimental phase diagrams and …

The Ti-Al-Fe-V quaternary system is a very useful system for titanium alloy development.
However, there are few reports on the thermodynamic description of this system. In the …

There is an increasing need to develop lower cost titanium alloys. In this investigation, Ti-Al-
Mn ternary alloy system was experimentally and computationally investigated using …

The Ti–Al–Mn ternary system is one of the most important systems in the development of low
cost titanium alloys. Although several experimental data of this ternary system are available …

The Ti–Cr–Mn ternary system is one of the most important systems in the development of
low cost titanium alloys. However, there are few reports of assessment for this system. In this …

Previous investigations of the Ti-Al-Fe-Cr quaternary system and its related sub-systems
were reviewed and summarized, then the thermodynamical database of the Ti-Al-Fe-Cr …

The Ti–Al–Cr ternary system is one of the most important systems to studying the titanium
alloys. Some experimental data of this ternary system are available and a few partial …

The sub-binary systems Al-Ti, Ti-V, and Al-V are reviewed and adopted from the previous
assessments, the thermodynamic analysis of the Al-Ti-V ternary system is performed by the …

Titanium alloys are highly sought after due to their excellent mechanical properties. One of
the most commonly used Ti alloys is Ti–6Al–4V, which contains 6% Al and 4% V by weight …

The phase diagrams and thermodynamics of the complex systems are of great importance
for the materials development and processing optimisation. The Calphad method is a …