… , but not to control a shock-induced interaction. In the present study, control devices in the
form … been tested to modify a 24 deg compression-corner-induced interaction in a Mach 2 flow. …

… was conducted to control the amplitude of shock unsteadiness associated with a 24 deg
compression-ramp-induced interaction in a Mach 2 flow. Two control configurations in the form …

… The investigation presented in this paper features the results from tests on the compression
ramp model, which is comprised of a 400 mm flat plate and a 24-degree ramp piece, as …

… the control time in one discharge pulse. Therefore, this paper reports an experimental work
on compression ramp shock wave/boundary layer interaction (CR-SWBLI) control using a …

… Two double compression ramp configurations were investigated in the present study. Both
of two configurations had the unchanged angles of α 1 = 12 and α 2 = 24 [30]. As shown in …

… 1(a), the computational model in this paper is a 24-deg compression ramp whose parameter
setup all refers to the experimental reports. The flow direction is from left to right with a free-…

… Finally, we observe that a short time ( U ∞ t / L ≈ 2 ) is required to form the oblique shock
over the compression ramp; before which, the compression-ramp surface pressures appear …

… aero-control surface is simplified and simulated as a three-dimensional flow over a compression
ramp … The transverse jet can be located either upstream from the ramp or on the ramp. A …

… compression ramp interaction in a Mach-7.2 flow. The second case explores separation control
… of a row of microramps located upstream of the main compression ramp. The effect of the …

… The internal flow of a mixed compression inlet typically involves one or more shock waves (…
the interaction, this paper investigated whether a second staggered row of micro-ramps could …