… was observed: the twin to slip transition takes place due to the … ε on the transition points of
deformation modes in Mg at the … stress leading to the slip to twin transition at 573 K has been …

… A few {10–12} extension twins could be observed in the specimens having relatively
coarse grain sizes (eg d = 7.27 μm in Fig. 2(e)), which might be introduced during mechanical …

… not at least one twin appeared in a … a twin to slip-dominated flow transition at a sufficiently
low d value [7], [19], [20], [21]. Different transition grain sizes have indeed been reported for Mg …

… of a slip or twin system is usually governed by a CRSS and a hardening law. Fig. 2 summarizes
the CRSS values reported in the literature for the slip and twin modes in pure Mg single …

… By means of ab initio calculations, we studied the matrix – twin transition in a perfect Mg
crystal where the { 10 1 2 } plane is the twinning plane. The twinning transition is described by …

… Such a transition is always related to a change of deformation mechanism [34], [35]. … twin
boundary when the PS-1 sample is compressed to a strain of 5% (The first abrupt transition of …

… magnesium, this work investigates the mechanical response of magnesium using the most
number of slip/twin … considered as an active slip mode for magnesium and its alloys. This work …

… the magnesium consisted of coarse grains with an average size of 2 mm. Twins belonging
… It is seen that a transition in DRX mechanisms results in a change of the slope of the …

… deformation transitions from twinning dominated to a combination of twinning and slip. …
This explains the frequent appearance of { 10 1 ̅ 2 } tensile twins in pure magnesium, also …

… of twins with large-scale atomistic calculations to predict twinning modes of crystalline materials.
We apply this framework to magnesium where there are two accepted twin … the transition …