Advanced high strength steels containing metastable austenite are of considerable interest
due to the combinations of strength and ductility that are achieved via austenite …

In this study, a novel processing route of intercritical Mn partitioning is proposed to stabilize
the reverted austenite in a medium Mn steel. The Fe-5Mn-0.2 C-1.5 Al (wt.%) steel is …

There are growing efforts aiming to increase significantly the balance of strength and
ductility of Advanced High Strength Steels (AHSS) to improve safety performance and fuel …

Manganese enrichment of austenite during prolonged intercritical annealing was used to
produce a family of transformation-induced plasticity (TRIP) steels with varying retained …

Quenching and partitioning (Q&P) processing of third-generation advanced high strength
steels generates multiphase microstructures containing metastable retained austenite …

The microstructural evolution with varying intercritical-annealing temperatures of medium-
Mn (α+ γ) duplex lightweight steels and its effects on tensile properties were investigated in …

Often, the addition of more than 4 wt.% Mn to medium-Mn steels is necessary to enhance the
thermal stability of intercritical austenite for achieving sufficient amounts of retained …

A composite model with different assumed flow behaviors for the individual microstructural
constituents and stability parameters for the metastable austenite transformation is …

The effects of the intercritical annealing temperature and initial microstructure on the stability
of retained austenite were investigated for a 0.1 C-6Mn (wt-%) steel. Medium-Mn …

A prototype medium-Mn TRIP steel (0.2 C–6 Mn–1.7 Si–0.4 Al–0.5 Cr (wt%)) with a cold-
rolled tempered martensite (CR) and martensitic (M) starting microstructures was subjected …