… Heat the sample to that temperature, deform it at the same strain rate by another 30% strain
and … , two samples were deformed under the same conditions up to a true strain of 0.32. They …

… Despite this broad similarity with the conditions reported in the present work, the coincidence
between the strength values is low. Table IV shows values of UTS obtained at 10Ā 1 sĀ 1 …

… We make a distinction between the true plastic strain rate and what is often used as the
strain ratesp~ed of the testing machine crosshead divided by the ongmal sample length. The …

… measure is used) was monitored as a function of time and fed back to the controller in order
to alter the actuator displacement rate to provide constant strain rate conditions during the …

… flow stress with strain, strain rate, and temperature (which is the … The strain hardening
representations (at constant strain rate … forming conditions of strains, strain rates, and …

… science under extreme conditions of pressure P, compression (r/r0) and strain rate (de/dt), …
it, such as compression, temperature, strain rate, phase and ultimately dislocation density, …

… both temperature and strain rate affect the strain hardening … strain rate and temperature on
deformation and then proceed to examine coupled conditions where the material temperature …

… with strain rate and reported that the strain rate sensitivity of carbon steel varies as a decreasing
function of temperature… experimental conditions of five strain rates and five temperatures …

… temperature and strain rate conditions they are likely to experience in an actual service
environment. The dynamic impact properties of engineering materials are commonly evaluated …

… strain rate (105 s 1), all effects due to strain rate have saturated, and material strength becomes
independent of strain rate. … rather insensitive to temperature and strain rate, whereas slip …