… of yielding points and ultimate displacements are very important. In … demands for buildings.
To investigate these criteria, pushover analysis is done on reinforced concrete frame buildings…

… Since higher seismic displacement demands are placed on systems with lower stiffness
and yield strength, damage vulnerability increases inevitably with the number of stories. …

This work proposes a novel procedure to guide the development of machine learning models
for estimating the seismic demand in existing reinforced concrete (RC) buildings. The …

… displacement ductility capacity, necessary to ensure that at the ultimate limit state displacement
demands … , will beneficially affect element displacement ductility demands in torsionally …

… Reinforced concrete buildings infilled with masonry panels are a very common construction
typology in Southern Europe, particularly in the Mediterranean countries. Infills are generally …

… In this study, a 9-story reinforced concrete building was … displacement demands based
on the Cyclic Pushover Analysis (CPA) procedure for the 9-story reinforced concrete building. …

… correspond to the displacement demands in the degrading and non-degrading systems,
respectively, and Sdn is the correction factor that accounts for the effect of degradation. If the …

… potential for human and material losses posed by older reinforced concrete buildings. …
found in existing reinforced concrete buildings constructed prior to 1971. Because …

… (ie, building materials, structural typologies, geometric configurations) of hospital buildings
in Italy, a case-study building representative of typical existing reinforced concrete (RC) …

… buildings is … buildings and correlate their values with the observed damage. The second
objective is to compare the roof displacement capacity with the roof displacement demand in …