The corrosion susceptibility of recrystallized and un-recrystallized grains in equal channel
angular pressed (ECAPed) Mg–9Al–1Zn (AZ91) alloys immersed in chloride containing …

Although qualitative investigations have been performed on the effects of discontinuous and
continuous Mg 17 Al 12 precipitates (DP and CP, respectively) on the corrosion resistance of …

It has been documented that the corrosion behavior of AZ91 (Mg–9Al–1Zn, wt.%) alloy is
strongly influenced by the morphology, distribution, and volume fraction of secondary …

This paper analyzed the effect of long period stacking ordered phases (LPSO) and aged-
precipitations on corrosion behavior of Mg–6Gd–2Y–1Zn–0.3 Zr magnesium alloys. As …

ABSTRACT A good combination of mechanical properties and corrosion performance is
desired when employing Mg alloys in engineering applications. Therefore, it is essential to …

The corrosion behavior and mechanism of as-cast, solid-solution treated, and as-extruded
Mg-14.4 Er-1.4 Zn-0.3 Zr (wt.%) alloys are investigated. The microstructure characteristic of …

Combining with electrochemical corrosion measurements, immersion and hydrogen
evolution testing performed in 0.9 wt.% NaCl solution at 37° C, the corrosion resistance of an …

In this paper, the effect produced by grain size uniformity and crystallographic orientation on
the corrosion behavior of the extruded Mg-2Zn-1Al bar was probed by means of techniques …

This work investigated the effect of sole yttrium and neodymium alloying on the
microstructure formation during severe plastic deformation by equal channel angular …

Magnesium (Mg) alloys have several advantages, such as low density, high specific strength
and biocompatibility. However, they also suffer weak points, such as high corrosion, low …