… simplified design equations for an unbonded posttensioned (PT) precast split hybrid shear
wall … be used as a bearing wall or a special reinforced concrete wall for building frames, as …

… In this study, a simple and easily applicable analytical method was developed to determine
… with shear wall, which is based on controlling the curvature distribution of shear walls by …

… simplified analysis procedure for evaluating the nonlinear seismic responses of numerous
high-rise buildings with RC shear walls … (UMRHA) procedure [9,10] and the coupled shear-…

… on the wall cross section, the magnitude and distribution of wall … the wall‐strain distribution
are found to be the ratio of wall … , the wall aspect ratio and configuration, the wall axial load, …

… In this research, shear forces attracted by shear walls according to the SMSA are compared
with respect to those obtained with 3D static analysis. Usually, the critical story for design …

… simplified nonlinear FEM procedure capable of accurately and efficiently capturing the
responses of single-storey and multi-storey light-frame wood shear wall … simplified procedure has …

… accuracy of a simplified hand method … of shear walls with openings. Parametric studies are
performed in which the location and size of the opening as well as the aspect ratio of the wall …

… that a conservative shear base is obtained. To keep the empirical formula simple, only the
… The objective of this paper is to develop a simple procedure for estimating the fundamental …

… a simplified procedure for the bracing verification, which will prospectively be found in a future
revision of DIN EN 1996-3. The simplified … shear walls according to the general procedure …

… 6 represents the beginning of any iteration cycle for a frame simplified to a twocolumn
bent connected to a shear wall by beams. At any joint (i, 1), rotation, ei 1, is dependent on the …