Fundamentals of Laser Ablation of the Materials Used in Microfluiducs
TC Chen, R Bruce - Micromach. Tech. Fabr. Micro Nano Struct, 2012 - books.google.com
Microfluidics falls into an intermediate range within the spectrum of applications for
microfabrication techniques. The width and depth of most microfluidic channels fall in the …
microfabrication techniques. The width and depth of most microfluidic channels fall in the …
Laser processing for bio-microfluidics applications (part I)
CG Khan Malek - Analytical and bioanalytical chemistry, 2006 - Springer
This paper reviews applications of laser-based techniques to the fabrication of microfluidic
devices for biochips and addresses some of the challenges associated with the manufacture …
devices for biochips and addresses some of the challenges associated with the manufacture …
Laser processing for bio-microfluidics applications (part I).
KM CG - Analytical and bioanalytical chemistry, 2006 - europepmc.org
This paper reviews applications of laser-based techniques to the fabrication of microfluidic
devices for biochips and addresses some of the challenges associated with the manufacture …
devices for biochips and addresses some of the challenges associated with the manufacture …
Laser ablation as a fabrication technique for microfluidic devices
EA Waddell - Microfluidic Techniques: Reviews and Protocols, 2006 - Springer
The use of microfluidic devices is making rapid inroads in the modern laboratory.
Traditionally, devices have been manufactured in silica owing to its well-understood surface …
Traditionally, devices have been manufactured in silica owing to its well-understood surface …
Rapid prototyping of microfluidic components by laser beam processing
M Wehner, P Jacobs… - Laser-based Micro-and …, 2007 - spiedigitallibrary.org
As a sequential production method, laser technology is considered not to be a competitor to
established plastic processing methods, but instead is used whenever small numbers or just …
established plastic processing methods, but instead is used whenever small numbers or just …
Femtosecond laser ablation for microfluidics
D Go´ mez, I Goenaga, I Lizuain… - Optical …, 2005 - spiedigitallibrary.org
We present some applications of femtosecond laser ablation for microfluidics. A doubled Ti:
sapphire femtosecond laser (λ= 400 nm; pulse width, 90 fs; pulse energy up to 350 μJ; pulse …
sapphire femtosecond laser (λ= 400 nm; pulse width, 90 fs; pulse energy up to 350 μJ; pulse …
Femtosecond laser micromachining and application of hot embossing molds for microfluid device fabrication
Femtosecond laser micromachining was used to create microfluid channel patterns on AISI
304L stainless steel to fabricate hot embossing mold patterns. To characterize the …
304L stainless steel to fabricate hot embossing mold patterns. To characterize the …
Laser micromachining of the materials using in microfluidics by high precision pulsed near and mid-ultraviolet Nd: YAG lasers
TC Chen, RB Darling - Journal of materials processing technology, 2008 - Elsevier
Both near-ultraviolet (UV) laser and mid-UV laser micromachining on materials have been
investigated systematically. The materials used in this research are sapphire, silicon, and …
investigated systematically. The materials used in this research are sapphire, silicon, and …
Precision fabrication of flexible microfluidic circuits using direct laser rapid prototyping solution
J Mur, A Mikelj, B Podobnik - Journal of Micromechanics and …, 2020 - iopscience.iop.org
An effective development platform for custom lab-on-a-chip and lab-on-a-foil solutions has
been regarded as a missing element for wider adoption of microfluidic technologies in …
been regarded as a missing element for wider adoption of microfluidic technologies in …