Abstract Fe 0.4 Cr 0.4 NiMn x Cu (0≤ x≤ 1.4) high entropy alloys (HEAs) were prepared by
copper-mold casting. The phase selection, microstructure, tensile properties and fracture …

In the present study, FeCoCrNiMnSi x (x= 0, 0.1, and 0.2, molar ratio) high-entropy alloys
(HEAs) were prepared via arc melting, and subsequently deformed via cold rolling and …

AlxCr0. 4CuFe0. 4MnNi (x= 0, 0.1, 0.2, 0.3, 0.4) high entropy alloys (HEAs) were prepared
by copper‐mold casting. The effects of Al were investigated on the microstructure, tensile …

A series of FeCrNiMnAl x (x= 0, 0.3, 0.5, 0.8, 1.0 in molar ratio) high entropy alloys (HEAs)
were prepared by the vacuum arc melting method. The effects of Al content on the …

Investigation of the microstructure and mechanical properties of FeNiMnCu x Al 0.1 Ti 0.1
(x= 0.5, 1.0, & 1.5) high entropy alloys (HEAs) with increasing Cu content has been carried …

The microstructure and tensile properties of (Fe 50 Mn 25 Ni 10 Cr 15) 100-x Al x (x= 0–8
at.%) medium-entropy alloys (MEAs) were investigated. It was found that the crystalline …

The effect of titanium-alloying on microstructure and mechanical properties of
Fe35Ni35Cr20Mn10 high-entropy alloy (HEA) was studied. The microstructure was …

The microstructure and tensile properties of Ni x FeCoCrAl high-entropy alloys (HEAs) were
investigated. The results indicated that the microstructure of Ni x FeCoCrAl HEAs can be …

The microstructure and tensile properties of Fe x CoCrNiMn high-entropy alloys (HEAs)
were investigated. It was found that the Fe x CoCrNiMn HEA has a single face-centered …

In order to strengthen the face-centered-cubic (FCC) type CoCrFeMnNi high entropy alloys
(HEAs), different contents of Mo (0–16 at.%, similarly hereinafter) were alloyed. Phase …