High-entropy alloys (HEAs) with the face-centered cubic structure usually exhibit decent
ductility, but their poor yield strength and expensive raw materials still limit their industrial …

Phase decomposition is commonly observed in Fe-Cu alloy and Cu-HEAs that has been
proved to harmful for the mechanical properties. Here we found that the phase …

Metallic materials can be strengthened by various kinds of plastic deformation strategies.
However, the deformed materials suffer poor ductility and thermal stability due to the high …

In order to strengthen the face-centered-cubic (FCC) type CoCrFeMnNi high entropy alloys
(HEAs), different contents of Mo (0–16 at.%, similarly hereinafter) were alloyed. Phase …

Microstructures and mechanical properties of the CoCrFeMnNi high-entropy alloys (HEAs)
treated by various annealing temperatures and times are investigated in this paper. Typical …

The effects of carbon content on the microstructure and room-temperature mechanical
properties of Fe 40 Mn 40 Co 10 Cr 10 high-entropy alloy (HEA) were systematically …

A Ni-rich NiFeCoCr-based high entropy alloy (HEA) doped with (W, Mo, Al, Ti, Nb) was
designed and prepared. After thermo-mechanical processing, the microstructure and tensile …

Abstract Fe 0.4 Cr 0.4 NiMn x Cu (0≤ x≤ 1.4) high entropy alloys (HEAs) were prepared by
copper-mold casting. The phase selection, microstructure, tensile properties and fracture …

The CrMnFeCoNi high-entropy alloy (HEA) has attracted extensive attention due to its
excellent ductility and fracture toughness. However, this kind of Cr-containing systems show …

An equiatomic CuFeMnNi high-entropy alloy (HEA) was synthesized and homogenized at
1000° C to achieve a microstructure of single face centered cubic phase based on …