Abstract Fe 0.4 Cr 0.4 NiMn x Cu (0≤ x≤ 1.4) high entropy alloys (HEAs) were prepared by
copper-mold casting. The phase selection, microstructure, tensile properties and fracture …

Abstract A novel FeCoNiCr 0.2 Si 0.2 (at.%, thereafter, all mean atomic ratios) high-entropy
alloy (HEA) was synthesized. The as-cast HEA exhibits a combination of excellent …

High entropy alloy has attracted extensive attention due to the increased requirement for
future high temperature structural superalloys. Quaternary Al-Cr-Fe-Ni alloys have been …

High-entropy alloys (HEAs) with the face-centered cubic structure usually exhibit decent
ductility, but their poor yield strength and expensive raw materials still limit their industrial …

The coarsening-grained single-phase face-centered cubic (fcc) medium-entropy alloys
(MEAs) normally exhibit insufficient strength for some engineering applications. Here …

Similar to the conventional alloys, attaining excellent combination of high strength and
ductility is still challenging in the high-entropy alloys (HEAs). In this work, a fully …

High-entropy alloys (HEAs) with a face-centered cubic (FCC) structure have recently
received significant attention due to their outstanding ductility and fracture toughness. In this …

This work presents a unique low-cost Fe 62 Co 5 Ni 10 Cr 13 Si 7 Al 3 (at%) medium-
entropy alloy (MEA) with ultra-high strength and ductility. A duplex partially recrystallized …

Abstract A novel (Co40Cr25 (FeNi) 31Mo4) 99· 5C0. 5 HEA (high entropy alloy) was
prepared by vacuum arc melting furnace and hot rolled with a reduction of 20% at 1100° C …

We reported the influence of Al contents on microstructure and elevated-temperature
mechanical properties in Co-free FeCrMnNiV 0.2 Al x (x= 0, 0.2, 0.3, 0.35 and 0.4) high …