… blind bolted moment-resisting connections between square hollow section columns and open
section … In order to overcome this issue, blind bolts with only one side of the connection are …

… blind bolting technology, also named as one-side bolting, nowadays has made it possible
to overcome the difficulties in the installation of bolted connections to SHS columns … moment-…

… -stub connections to RHS and CFST columns using one-side fasteners … columns. However,
scant numerical analysis was studied to blind bolted moment connections for CFTST columns…

… structural bolting cannot be used due to lack of access to the inner side of the hollow sections.
… Strength and rotational response of moment connections to tubular columns using flowdrill …

… Due to the lack of access to the inner side of the column, it is … is to develop a moment resisting
connection for low to moderate … hollow section (CFSHS) has been selected as the column …

… of the column face of SHS governs the moment connection … to the hollow sections is used
to improve connection behavior… the bolt inner sleeve is then free to bear against the inner side …

… of gaining access to the inside of hollow sections, through-… hysteretic curves obtained from
both sides of a specimen are … the yielding moment of 30 kN m when the blind bolts in the top …

… (CFST) columns that only allow one-side access. This paper … is certainly different from that
of individual hollow section or … the EHB connection is suitable for semirigid or rigid moment …

… section beams connected to hollow section columns, a new … one side only, without the
demand for access into the hollow … bolted moment-resisting connection with T-stubs connecting …

… section connection to a hollow tubular section column. Architects find it useful in many occasions
to use structural hollow sections … of connecting to the sides of an SHS with blind bolts as …