… with FEI Versa 3D Dual Beam system (Hillsboro, OR, USA) using ion beam currents of 15
nA for … The microstructures of the micro-pillars are presented by IPF in Figure 1a for Ni and in …

… effects of various dislocation junctions, micropillars with dimensions of 7.5 μm in diameter and
15 μm in height were prepared in a focused ion beam … FIB-induced damage was minimized…

… A series of micropillars with varying initial … oriented Ni-Mn-Ga single crystals by focused ion
beam milling. We successfully reduced the twinning stress of the as-prepared micropillars by …

… Using annular Ga focused ion beam (FIB) milling at 30 kV, two sets of pillars were produced
with differing compression directions. The first set of pillars was milled on the film surface, …

… using the Focused Ion Beam (FIB) method with a gallium ion … cylindrical micropillars, whereas
for dog-bone micropillars, slip … This work may lead to new ideas to eliminate the effect of …

… In this work, the effect of crystallographic orientations and the strengthening due to … micropillars
of pure zirconium (Zr) with ≥99.9% purity. Micropillars fabricated using focused ion beam …

… stress-induced phase transformation, were characterized via pseudo-single crystal micropillar
… Dense and cylindrical micropillars were fabricated using a focused ion beam from pseudo-…

… roughness introduced by focused ion beam milling in experiments. It is assumed that the
number of nucleation sites is proportional to the surface area of the micropillar. Regarding the …

… 3 mm was selected for micropillar fabrication. The crystallographic … micropillars with 1
μm diameter were fabricated employing a Helios Nano Lab 600 dual-beam focused ion beam …

This study investigates the mechanical properties of A508-3 steel irradiated with Fe ions to
0.1, 0.4, 2.0, and 5.0 dpa at 20, 100, and 300 C using a nanoindentation experiment and …