… (IP) loading is paramount to correctly assess the seismic … The infill panel was built in total
connection with the concrete … of the model allows its application for infills under whichever …

… in-plane drift before being tested under out-of-plane loading. … Four concrete masonry infilled
RC frame specimens were … in the FE model due to slippage of the masonry infill against the …

… of masonry infill panels due to poor connections between the … flexural strength under
out-of-plane loading was more … and applied loads in the finite-element model is shown in Fig…

… the concrete masonry infilled RC frames subjected to in-plane lateral loading. The ABAQUS
… back side, to monitor any possible out-of-plane movements of the infill wall and the concrete …

… a FE macro-model to simultaneously simulate the IP-OOP infill … of the load pattern, different
configurations of RC frames, … The infill panels are modelled by means of two equivalent …

… have been commonly used in the simulation of in-plane behaviour of masonry infilled …
finite element modeling, four masonry infilled RC frames were tested under out-of-plane loading …

… The infill panels were loaded out-of-plane, cyclically, Figure 4… properties for the infilled
frame finite element model are listed in … for both the in-plane and out-ofplane loading, shown in …

… investigated infill panels undergoing a combination of in-plane and out-of-plane loadings, …
compared to micro-models, which instead involve non-linear finite element modeling of the …

… Infilling steel and RC frames with unreinforced masonry walls … (OOP) seismic loads have
been investigated in depth for … models range from the simple replacement of an infill panel by …

… accurately for both in-plane and out-of-plane loading scenarios. … and strength of masonry
infilled frames were presented and … a robust finite element model to simulate the in-plane and …