… firstly welded with one main plate and two attachment plates, … attachment for fatigue tests
were sampled from the welded … of two attachment plates and distortion of the main plate. The …

… of irregular weld root shapes to enhance the fatigue strength of … For the S1100 steel grade,
additional fatigue tests for … the longitudinal weld penetration profiles, taken from the welded …

… the fatigue behavior of unstrengthened and CFRP strengthened cracked Q345, Q460, and
Q690 steel plates. … and strengthened specimens of three grades of steel were tested under …

… Stop holes, welding repair, and steel plate attachment are … -welded plates were not explicitly
verified by fatigue testing data. … specimen experienced only longitudinal tensile loading, as …

… A total of 54 fatigue tests were carried out in this study of … , in transverse and longitudinal
direction to the weld line. No … exceptionally long fatigue lives which further strengthen the …

… after fatigue testing and relaxation was observed after total failure at the un-failed side of the
attachment. … In this study, weld profile examination was carried out on longitudinal stiffeners …

… two main longitudinal built-up I-section steel plate girders with … Eight steel test coupons taken
from girders were tested for … strengthening configuration with CFRP plates on butt welds, a …

… with a modulus of 460 GPa to strengthen steel plates with longitudinal fillet weld attachment
(see … There is a need to (i) conduct more fatigue tests of FRP strengthened tubular joints; (ii) …

… The TIG-dressing was carried out only for the weld toes between the attachment and base
… and local weld geometries of the fatigue test specimens. The longitudinal residual stress …

… tests of the base material, and fatigue tests of as-welded and HFMI-treated details with
longitudinal and transverse attachments… Attachments were made from the same plate and welded …