Simple model to predict the effect of take-up pressure on fibre diameter of PET melt spinning

Y Qin, DW Schubert - Polymer, 2019 - Elsevier
… scale poly (ethylene terephthalate) (PET) melt spinning. PET … effectively predict the variation
of PET fibre diameter as a … axial and radial temperature gradients in the melt spinning of PET …

[图书][B] Threadline Modification of Poly (Ethylene Terephthalate)(PET) High-speed Melt Spinning by Integration of Horizontal Liquid Isothermal Bath (HIB) and Drawing …

Y Jiang - 2020 - search.proquest.com
… of corresponding PET fibers in this study. The water was applied as bath liquid across all
the … Moreover, in order to increase spinnabilities of PET fibers within one-step HIB process, …

Similarities and Differences in Structure Formation Processes in Polyester Yarns During Orientational Drawing and High-Speed Spinning. Review

VE Geller - Fibre Chemistry, 2016 - Springer
… a targeted change in structural and mechanical properties of PET yarns. In high-speed spinning,
a targeted change … , the transverse heterogeneity of the structure increases due to radial

Melt-spun bio-based PLA-co-PET copolyester fibers with tunable properties: Synergistic effects of chemical structure and drawing process

Z Zhang, J Zhou, S Yu, L Wei, Z Hu, H Xiang… - International Journal of …, 2023 - Elsevier
… In this study, a series of copolyester fibers based on terephthalic acid (PTA), ethylene glycol
… via melt copolymerization and spinning. The resultant PLA-co-PET (PETLA) fibers exhibited …

Non-isothermal viscoelastic melt spinning with stress-induced crystallization: numerical simulation and parametric analysis

R Wang, K Hao, H Wang, C Wang, L Chen… - International Polymer …, 2022 - degruyter.com
… to study the melt spinning process of polyester fibers, mainly due to the lack of flow data. …
the axial and the radial variation of temperature and stresses along the spinline together with …

Novel melt-spun polymer-optical poly (methyl methacrylate) fibers studied by small-angle X-ray scattering

M Beckers, T Vad, B Mohr, B Weise, W Steinmann… - Polymers, 2017 - mdpi.com
… to the standard melt spinning is the water quench just after the spinning when the fiber is
still … model for the description of radially decaying periodical density variations over the fiber

Higher-order structure of poly (ethylene 2, 6-naphthalene dicarboxylate) fibers produced by direct high-speed spin-drawing

Y Kawahara, F Terasaka - Journal of Macromolecular Science, Part …, 2019 - Taylor & Francis
… the benzene ring in poly(ethylene terephthalate) (PET) with a … that the ultra-high-speed
melt spinning process using PEN … HSSD PEN fibers was investigated by focusing on its radial

Lamellar and fibrillar structure evolution of poly (ethylene terephthalate) fiber in thermal annealing

Y Liu, L Yin, H Zhao, G Song, F Tang, L Wang, H Shao… - Polymer, 2016 - Elsevier
… in passenger radial tires. In the rubber dip process for the yarns, PET fibers undergo heat
treatment for several minutes at around 100–240 C, which may deteriorate the fiber structures …

Progress in Fiber Spinning Technology

T Kikutani - High-Performance and Specialty Fibers: Concepts …, 2016 - Springer
radial direction, and steady-state process with constant … (ethylene terephthalate) obtained at
the synchrotron radiation … In this chapter, new fiber spinning technology for the melt spinning

The evaluation of structure and properties of high-strength polyester industrial fibers with different polycondensation processes

K Chen, Y Liu, H Ji, Y Zhang, M Song… - The Journal of The …, 2021 - Taylor & Francis
… the performance and structures of poly(ethylene terephthalate) … Two PET fibers were prepared
by melt spinning with SSP … (β 100 ) are the intensity variation of the azimuthal angle of the (…