… PLD is a relatively inexpensive technology for growing thin films that meets the requirements
for fabricating memristive devices, primarily because of the possibility of precise adjustment …

… , memristive nanodevices with dynamical nonlinear switching … switching depends on the
electroforming voltage polarity, the … switching behavior of memristors with a crossbar structure, …

… devices. [ 11-13 ] One of these trends is the development of methods to produce memristive
structures such as phase-change … , which occurs when a negative polarity of the bias voltage …

… Memristive devices are mostly focused on the use of binary … be switched by applying an E
field of opposite polarity and … an appropriate forming voltage can generate structural defects …

… , the V o -based CFs were stochastically formed (Figure 2a). To the second order memristor,
… engineering the device structure, the double-NDR and Mott resistive switching were …

… structural properties were confirmed by using UV–vis spectrophotometry and x-ray diffraction,
respectively. The memristive and resistive switching … the polarity of the applied voltage [7]. …

… of the device area) by controlling the initial bias polarity and current … tri-layer structure) and
each cell can be reversibly switched between low resistive … Memristive devices for computing …

… reversed stimulation polarities are not … formation, geometry and microstructure, to quantitatively
determine the composition, chemical state and local structure of the filament or switching …

… voltage polarities are required to SET and RESET the device… -free SET voltages found for
the other two device structures. … to V RESET(2) (Figure 5g,h), the device switches back to the …

… However, these devices do show the formation of a visibly dark … threshold switching, in which
bias sweeps of opposite polarities … Architecture and switching characteristics of low voltage …