… friction stir lap welding at different rotational and welding speeds to study IMC formation at the
joint interface and their effect on weld … The results of the EDS quantitative analysis different …

… between aluminum alloys and steels and subsequent mechanical performance of processed
dissimilar joints are strongly depended on the formation and morphological characteristics …

… to the brittle intermetallic compounds (IMCs) that form at the weld … strain on the formation
mechanism of IMCs in a welded joint … The results demonstrate that Al 3 Mg 2 is formed when the …

… The formation of intermetallic compounds (IMCs) during the friction stir welding (FSW) of
aluminum and steel is problematic because these IMCs can reduce weld strength. In this study, …

… In the present investigation, friction stir welding of commercially pure Al and commercially
pure Ti was successfully carried out. The mechanisms of microstructural evolution for both Ti …

… –Mehl–Avrami type analysis of the evolution of the intermetallic compound volume fraction
within the friction stir welding joint as a function of the friction stir welding process parameters. …

… the characteristics of welding defects, intermetallic compounds, weld strength and micro-hardness
in friction stir welding … Qualitative and quantitative assessments of the welding defects …

… on intermetallic formation during the friction stir welding of … and morphologies of the
intermetallics. Different structural steels … Thermodynamic analysis of the formation and growth of Al-…

… ) material of AA2219 alloy and the Friction Stir (FS) welded portion of CR AA2219 and their
… grain formation and precipitate dissolutions in CR AA2219 and FS weld were characterized …

… Friction Stir Welding and Friction Stir Spot Welding processes use a non-consumable rotating
tool consisting of a pin extending below a shoulder that is forced into the adjacent mating …