A newly developed Mg–2Zn-0.3 Ca-0.2 Ce-0.1 Mn (in weight%, ZXEM2000) wrought alloy
exhibits an exceptionally high tensile ductility (29%±1.4% tensile elongation) along the …

Abstract Mg–6.0 Zn–2.0 Yb–0.5 Zr (wt%) alloy exhibits excellent strength and ductility
synergy after thermomechanical and heat treatment. Unfortunately, the hot workability and …

Low ductility and strength are major bottlenecks against Mg alloys' wide applications. In this
work, we systematically design the composition and fabrication process for a low-alloyed Mg …

Abstract The high strength Mg-4Zn-0.5 Ca-0.5 RE magnesium alloy was subjected to
different hot deformation processes of extrusion, forging, and their combination for grain …

In this work, the hot compression behavior and microstructure evolution of Mg-8Gd-3Y-xZn-
0.6 Zr (x= 0, 1.5) alloys were investigated by Gleeble-1500D thermal simulation test …

The roles of Zn content and thermo-mechanical treatment in affecting microstructures and
mechanical properties of Mg-x% Zn-1% Mn (mass fraction, x= 4, 5, 6, 7, 8, 9) wrought Mg …

The effects of fabrication processing methods on the workability of Mg–Zn–Zr wrought
magnesium alloy (ZK60A) were investigated based on the microstructure and inherent …

Abstract An extruded Mg–8Gd–4Y–1Nd–0.5 Zr alloy was pre-heated at 470° C for 1 h and
subsequently compressed at 470° C and two strain rates of 0.2 and 0.0003 s–1 …

To explore high temperature ductility, a new Mg-2.70 Zn-1.34 Y-0.37 Ca-0.02 Zr (wt.%) alloy
has been fabricated by novel multidirectional forging (MDF) and hot rolling. The …

The hot compression behavior of as-extruded Mg-0.6 Mn-0.5 Al-0.5 Zn-0.4 Ca alloy was
studied on a Gleeble-3500 thermal simulation machine. Experiments were conducted at …