A type-II phase-tracking receiver
We present a new analog-to-digital converter (ADC)-based architecture of a phase-tracking
receiver (PT-RX) optimized for ultra-low-power (ULP) and ultra-low-voltage (ULV) …
receiver (PT-RX) optimized for ultra-low-power (ULP) and ultra-low-voltage (ULV) …
A Bluetooth 5 transceiver with a phase-tracking RX and its corresponding digital baseband in 40-nm CMOS
A 0.8-V Bluetooth 5 (BT5) digitally intensive transceiver with a phase-tracking RX and a
digital TX in 40-nm CMOS is presented. For the phase-tracking RX, a hybrid loop filter with a …
digital TX in 40-nm CMOS is presented. For the phase-tracking RX, a hybrid loop filter with a …
Design and analysis of a DCO-based phase-tracking RF receiver for IoT applications
YH Liu, VK Purushothaman… - IEEE Journal of Solid …, 2019 - ieeexplore.ieee.org
This paper presents an energy-/area-efficient digitally controlled oscillator (DCO)-based
phase-tracking Receiver for Internet-of-Things (IoT) applications. The RX leverages the …
phase-tracking Receiver for Internet-of-Things (IoT) applications. The RX leverages the …
24.1 A 770pJ/b 0.85V 0.3mm2 DCO-based phase-tracking RX featuring direct demodulation and data-aided carrier tracking for IoT applications
We propose an ultra-low-power (ULP) and low-voltage phase-tracking RX for IoT
applications. Several popular standards are defined for IoT, eg, IEEE802. 15.4 and …
applications. Several popular standards are defined for IoT, eg, IEEE802. 15.4 and …
A 164- W 915-MHz Sub-Sampling Phase-Tracking Zero-IF Receiver With 5-Mb/s Data Rate for Short-Range Applications
Y Guo, Z Fang, K Tang, Z Weng, C Yang… - IEEE Journal of Solid …, 2022 - ieeexplore.ieee.org
This article presents a 915-MHz ultra-low-power (ULP) sub-sampling phase-tracking
receiver (SSPT-RX). It is targeted for the power-constrained devices that need short range …
receiver (SSPT-RX). It is targeted for the power-constrained devices that need short range …
A 0.8V 0.8mm2 bluetooth 5/BLE digital-intensive transceiver with a 2.3mW phase-tracking RX utilizing a hybrid loop filter for interference resilience in 40nm CMOS
This paper presents a low-voltage (0.8 V) ultra-low-power Bluetooth 5 (BT5)/Bluetooth Low
Energy (BLE) digitally-intensive transceiver for IoT applications. In comparison to BLE, BT5 …
Energy (BLE) digitally-intensive transceiver for IoT applications. In comparison to BLE, BT5 …
A 0.7-V sub-mW type-II phase-tracking Bluetooth low energy receiver in 28-nm CMOS
We present an architecture of a Bluetooth low energy (BLE)-compliant receiver which, for the
first time ever, breaks the 1mW barrier of power consumption. It is based on a type-II phase …
first time ever, breaks the 1mW barrier of power consumption. It is based on a type-II phase …
A 0.3-to-1-GHz IoT transmitter employing pseudo-randomized phase switching modulator and single-supply class-G harmonic rejection PA
A wideband Internet of Things (IoT) transmitter (TX) employing open-loop binary frequency-
shift keying (BFSK) modulator with a pseudo-randomized phase transition (PRPT) time and …
shift keying (BFSK) modulator with a pseudo-randomized phase transition (PRPT) time and …
A 24 to 30-GHz Phased Array Transceiver Front End With 2.8 to 3.1-dB RX NF and 22 to 24% TX Peak Efficiency
W Lee, C Ozdag, JO Plouchart… - IEEE Journal of Solid …, 2024 - ieeexplore.ieee.org
This article presents a compact 24–30-GHz phased array transceiver (TRX) front end (FE)
with high transmitter (TX) power efficiency and low receiver (RX) noise figure (NF) in a 130 …
with high transmitter (TX) power efficiency and low receiver (RX) noise figure (NF) in a 130 …
A broadband reflection-type phase shifter achieving uniform phase and amplitude response across 27 to 31 GHz
Y Chang, BA Floyd - 2019 IEEE BiCMOS and Compound …, 2019 - ieeexplore.ieee.org
This paper demonstrates a broadband reflection-type phase shifter (RTPS) for millimeter-
wave phased-array applications. Implemented in 45-nm SOI CMOS, the proposed …
wave phased-array applications. Implemented in 45-nm SOI CMOS, the proposed …