… the joining of low carbon zinc coated steel with aluminum … As brazed joints are formed
due to formation of intermetallic … Interstitial free steel with low carbon (<0.06) and zinc coated …

… For a comprehensive and critical analysis, other solid-state joining processes related to …
Al–interstitial free (IF) steel [51]. Oxide layers between the joining surfaces of Al/steel hinder the …

… More recently, numerous efforts to join Al alloys to steel … of intermetallic compounds of
FeAl 3 at the Al/steel interface. … The area observed in Figure 3 was selected for our analysis. …

… In the present study, 6061 Al alloy and DP780 steel sheet were joined … The intermetallic
compounds (IMCs) in the welded joints were thoroughly analyzed using various characterization …

… Structures fabricated by welding of aluminum and steel … leads to brittle weld interface of
aluminum and steel. In addition, a … best welding techniques to join similar and dissimilar materials …

… fusion joining operations is the formation of a thick intermetallic … role in determining the
characteristics of the fusion zone. In Al-… and interstitial free steel using friction stir joining in a butt …

… the heat input, microstructure characteristics and tensile-shear strength… Intermetallic compounds
(IMCs) formed at the Al/steel … However, the joining of Al to steel is challenging due to the …

… joining cold-rolled and annealed GA-IF (interstitial free) steel of … Fe-Zn intermetallic formed
by Zn coating over steel. The main … This analysis may be helpful to evaluate any LME for high-…

… dissimilar alloy joints is dependent on the intermetallic phases (… of Zn coated interstitial free
(IF) steel to 1050 aluminium alloy, … This paper uses detailed microstructural characterisation …

… The results revealed that various kinds of intermetallic … of Zn (97 wt%)–Mg (1.5 wt%)–Al (1.5
wt%) on interstitial free steel, … a comprehensive analysis of intermetallic phase formation at …