… (specific to the application). If a small stabilizer thickness is used, the rSFCL can be seen
as an interesting candidate to limit the fault current because it can be designed to have a high …

… transmission systems. Several researchers have claimed the resistive superconducting fault
current limiter … • The power system equipment in general can be designed with lower TFC • …

… of future DC grids, especially the multi-terminal DC grids. … the designed parameter scheme
regarding that the two SFCLs have the same currentlimiting rate towards the DC fault current. …

… fault currents in multi-terminal direct current systems (MTDC), … superconducting current
limiter (SFCL) and a direct current … that can reduce the fault current by 70% was designed and …

… Multi-terminal prototype superconducting fault current limiter … Superconducting fault current
limiter (SFCL), which is used in … direct current (VSC-HVDC) transmission systems to limit fault …

… the further development of multiterminal HVDC systems. Being … inductive DC superconducting
fault current limiter (SFCL) to … , the current limiting threshold of the SFCL can be designed …

… A novel application of resistive type superconducting fault current limiters in the five terminal
meshed HVDC … that the fault current could be reduced up to 70% while the system stability is …

… Superconducting fault current limiters (SFCL) are the new type of FCLs, which put …
Carrapatoso, “Application study of superconducting fault current limiters in meshed HVDC grids …

… In order to study the influence of SFCL on multi-terminal flexible HVDC transmission
system, the simulation model is established in PSCAD. Considering the change for external re…

… in HVDC transmission systems [13,14]. In [15], a novel hybrid superconducting fault current
limiter with a … The authors experimented with a scale-down test circuit of the proposed design. …