… use functional semiconductor layer after printing and annealing at low temperature (<250 C),
making … are vacuum-deposited and patterned with photolithography to obtain short and well-…

… fewer grain boundaries in semiconductor films, enhancing the … UV NIL, Au film with nanoporous
structures was patterned by … PMMA sacrificing layer using NSL is first fabricated (process …

… (32) The ITO source and drain electrodes are patterned with minimal line width to achieve
… (a) Schematic diagrams of printing sequence of layer-by-layer fabricated transistor and its …

… 2D semiconductors, especially the layered … patterned at the same time, which makes this
approach feasible for large scale circuit fabrication and layer-by-layer patterning of 3D circuits. …

… (5 nm/40 nm) through a photoresist mask patterned with photolithography and lifting off the
resist. To fabricate all inkjet-printed FETs, we first formed the dielectric layer by applying eight …

… manufacturing, is a manufacturing process in which the materials are deposited layer by layer
… is a printing process where functional inks are deposited and patterned on a 3D freeform …

… By using scanning electron … in fabricating identical patterns across the array with similar
optical properties. To generate such a multicolor array, we first patterned the red-emitting layer …

… good electric conductivity and low contact resistance with the polymer semiconductor layer.
Finally, the ability of the device to function under large strains was demonstrated using the …

… The chemical selectivity of the patterned films was quantified using Auger electron … as
a semiconductor layer owing to its use in TFTs that do not require scarce elements such …

… used to fabricate strain-insensitive circuit elements, including … layer, giving a patterned
CONPHINE semiconductor layer. … were patterned by spray coating the CNT solution through a …