… fouling model, with upgraded precision, consistency and calibration in the description of the
… model, an evolution of the Activated Sludge Model 3 (ASM3), including the simultaneous …

… 36 h to 25 h was also reported for an aerated submerged membrane bioreactor treating high
strength acrylonitrile-butadiene-styrene (ABS) wastewater [40]. In the study by Ren et al. [38]…

… of effluent quality, operating costs (such as membrane fouling, … or altogether simultaneously)
and the default parameters for … 1 for a submerged membrane bioreactor system: including …

… [26] found that a submerged MBR had smaller particles of … In both cases, results indicating
a high quality of effluent … reaction zones with a simultaneous high concentration of MLSS. The …

… Modeling of effluent quality parameters in a submerged membrane bioreactor with
simultaneous upward and downward aeration treating municipal wastewater using hybrid models," …

… studied the effects of submerged MBR’s wastewater treatment. This … simultaneous component
of the total rate equation. The fifth floor is the input floor of the ASM3 model parameters, is …

… was homogenous; however, to make a circulation in the wastewater flow from bottom to the
surface of reservoir per 15 min and maintain wastewater quality an immersed pump was used…

… modeling from lab to full-scale submerged MBRs and assesses the existing mathematical
models for P-removal from domestic wastewater… iii) simultaneous denitrification and EBPR and …

… In both the submerged and side stream MBR processes, … using simultaneously ANN and
ANFIS models to predict and … the inputs parameters along with the normalized OLR, effluent pH, …

… found in the practice of wastewater treatment by sMBR [22]… simultaneous development of
a fouling layer, thus leading to an improved modeling and dynamic simulation of the membrane …