… between aluminum alloys and steels and subsequent mechanical performance of processed
dissimilar joints are strongly depended on the formation and morphological characteristics …

… The formation of intermetallic compounds (IMCs) during the friction stir welding (FSW) of
aluminum and steel is problematic because these IMCs can reduce weld strength. In this study, …

… In the present investigation, friction stir welding of commercially pure Al and commercially
pure Ti was successfully carried out. The mechanisms of microstructural evolution for both Ti …

… –Mehl–Avrami type analysis of the evolution of the intermetallic compound volume fraction
within the friction stir welding joint as a function of the friction stir welding process parameters. …

… the characteristics of welding defects, intermetallic compounds, weld strength and micro-hardness
in friction stir welding … Qualitative and quantitative assessments of the welding defects …

… on intermetallic formation during the friction stir welding of … and morphologies of the
intermetallics. Different structural steels … Thermodynamic analysis of the formation and growth of Al-…

… Moreover, this scanning electron microscopy (SEM) analysis of the welds revealed that the
Al 12 Mg 17 intermetallic compounds (IMC) layer varied in thickness and the debonding had …

… the formation and evolution mechanism of intermetallic compounds (IMCs) in friction stir welding
(… to study the whole IMCs formation and growth process at the Al/Mg bonding interface in …

… friction stir welding technique. The effect of tool offset on micro/macrostructure and mechanical
… of the welded joints was investigated. The intermetallic compound (IMC) formation in the …

… of these intermetallics. … tool rotational speed on dissimilar joint formation in friction stir welding
(FSW) of … The characteristics and formation of intermetallic compounds (IMCs) at the Al/Ti …