Abstract Design method of flexible denim fabric was discussed. Six kinds of samples were
designed and their properties were tested. Lyocell fabric was taken as an example, the key …

Hand knitting is the foundation stone of today's mechanical and electronic stitch formation. In
1589, W. Lee invented the mechanical stitch formation technique on the stocking frame. His …

Grey cotton fibers with a mean fiber length and fineness of 29 mm and 4.2 micronair was
pretreated, scoured and dyed. Three ring yarns were spun separately from 100% grey cotton …

The significance of cotton as one of the core raw materials in weaving can be realized based
on the utility of approximately 75% of annual worldwide produced cotton in the production of …

Methods used in actual plant operations for finishing of cotton goods for special fashion
effects are surveyed. It is pointed out that by combining two or more treatments an unlimited …

Modern cotton fiber production is focused on providing an industrial raw material for
spinning mills. These mills require a raw material that performs reliably and facilitates their …

Cotton slivers delivered from a high-production card, Toyoda CK-7C, at production rates of
35, 50, 70 and 1001bs/hr were processed on three kinds of pre-comber processes with …

PROPERTIES OF THE NATURALLY COLORED COTTON AND ITS APPLICATION IN THE
ECOLOGICAL TEXTILES Thursday, September 13, 2007 - 1:45 PM PROPERTIES OF THE …

Production technologies of cotton flax blended three-dimensional pattern home textiles
fabric were summarized. JC/flax 80/20 14.5 tex blended yarn was used as warp and weft …

The comparison of quality parameter between Cotton and melange processes for different
count and melange ratios have been studied. Here the yarns are produced from Indian …