… mechanical properties. Therefore, the effects of these defects on the mechanical properties
… In this study, the effect of a single spherical defect on the tensile properties was investigated …

… For this study, plates oriented with the long cross-section dimension oriented 45 to the X
axis (in other words, 45 to the powder deposition/rake direction) were used for tensile property …

… This work used the ANN algorithm to build the relationships among mechanical properties
of as-printed Ti-6Al-4V … (2018) Defects-dictated tensile properties of selective laser melted …

… the tensile properties of L-PBF Ti-6Al-4V. Therefore, this paper investigates the tensile properties
of L-PBF Ti-6Al-4V … of strong and ductile Ti–6Al–4V by selective laser melting via in situ …

… Ti-6Al-4V produced via SLM. Moreover, few studies investigate small fatigue crack growth
(SFCG) behavior of SLM Ti-6Al-4V… crack growth behavior in SLM Ti-6Al-4V for various process …

… , anisotropic behavior, and the defect effects of selective laser melted (SLM) and then heat-…
the optimal mechanical property. Simonelli et al. [14] tested the tensile property anisotropy of …

… To this end, we measured the mechanical properties and defect structure of LPBF fabricated
Ti–6Al–4V … and reliability of AlSi10Mg specimens fabricated by selective laser melting [26]. …

… correlate with the mechanical properties, especially fatigue, is still debated. Therefore, it
can be stated that the effect of powder characteristics on the mechanical properties of AM …

… Phase volume fractions, quantified by an SSPT model, are incorporated to simulate
temperature-driven microstructure evolution and resultant mechanical properties of Ti–6Al–4V …

… 5b summarizes the tensile properties of the SLM Ti-6Al-4V … It was observed that Ti-6Al-4V
samples under the SLM as-… Defects-dictated tensile properties of selective laser melted …