… In the present investigation, friction stir welding of commercially pure Al and commercially
pure Ti was successfully carried out. The mechanisms of microstructural evolution for both Ti …

… on intermetallic formation during the friction stir welding of … and morphologies of the
intermetallics. Different structural steels … Thermodynamic analysis of the formation and growth of Al-…

… The formation of intermetallic compounds (IMCs) during the friction stir welding (FSW) of
aluminum and steel is problematic because these IMCs can reduce weld strength. In this study, …

… the formation and evolution mechanism of intermetallic compounds (IMCs) in friction stir welding
(… to study the whole IMCs formation and growth process at the Al/Mg bonding interface in …

… the characteristics of welding defects, intermetallic compounds, weld strength and micro-hardness
in friction stir welding … Qualitative and quantitative assessments of the welding defects …

… of these intermetallics. … tool rotational speed on dissimilar joint formation in friction stir welding
(FSW) of … The characteristics and formation of intermetallic compounds (IMCs) at the Al/Ti …

… Al/Mg even with friction stir welding due to the formation of intermetallic compounds (IMCs). …
A comparative analysis is made for both the processes, and the study is concluded with the …

… The intermetallic compounds present as a layer at the interface, exhibiting nanometric grain
… Concerning the intermetallic compound formed in SZ, the elemental analysis showed a …

… the characteristics of the morphology, distribution, and formation mechanism of thicker
intermetallic compounds … microscope) to characterize the intermetallic compounds produced in the …

… friction stir welding technique. The effect of tool offset on micro/macrostructure and mechanical
… of the welded joints was investigated. The intermetallic compound (IMC) formation in the …