… 0.2, 0.5, 1.0 wt%) were studied at room temperature. Ce additions to ternary Mg-Sn-Ca alloy
… of second phase from CaMgSn to (Ca, Ce)MgSn and Mg 12 Ce. The volume fraction of …

… master alloy were used to prepare the Mg–6Al–1Ca (wt%) alloy. The raw materials were …
and a cross-section of 1.0 × 1.0 mm 2 had been extracted from the Mg–6Al–1Ca extruded bar, …

… under a mixture of SF 6 and CO 2 gas atmosphere and cast different Mg-Ca alloy with Ca
content of 1.0, 2.0, and 3.0 wt.% [17]. It has been reported that the microstructure of all the cast …

… , Ca was introduced into the Mg-3Sn alloy as … of Mg-3Sn-xCa (x = 0, 0.2, 0.6, 1.0 wt%) as
an anode for Mg-air battery were investigated. The results revealed that the Mg-3Sn-1.0Ca alloy …

… The strength of Mg-1.0Sn-0.6Ca alloy can be also enhanced via addition of 0.2 wt% Ce,
since the trace Ce addition is beneficial to the grain refinement, and the tensile ductility is also …

… , ~0.6 wt% and ~1.0 wt%, were added into the Mg-1.0 wt% Ca based alloys, to clarify their
effects on modifying the microstructure and mechanical properties of as-extruded Mg samples. …

… mm/y to 1.0 ± 0.1 mm/y for the laser-processed Mg–0.6Ca, and from 1.6 ± … Mg alloys:
Mg–0.6Ca (wt.%) and Mg–0.5Zn–0.3Ca (wt.%). The purpose was to develop biomedical Mg alloys …

… and recrystallized ternary alloys, Mg-0.6Ca-0.5Sc and Mg-0.6Ca-1.0Sc were compared with
those of binary Mg-0.6Ca and Mg-1.0Sc alloys. Results show that for all the alloys studied, …

… Mg‒Zn‒Ca alloys (Mg-3.2Zn-1.6Ca at 150C, 175C, 200C and 225C; Mg-1.05Zn-0.5Ca and
Mg-1.9Zn-0.3Ca … Ca 2 Mg 6 Zn 3 , while the precipitation of Mg 2 Ca had no or little effect (in …

… Ca and Sr, are a current research frontier. In this study, biodegradable ultrafine-grained pure
Mg, Mg–Ca alloy, and Mg–Sr alloy … The grain size of the as-cast pure Mg was 1.0 ± 0.8 mm …