光固化3D 打印改性碳纤维/光敏树脂复合材料的制备与性能调控.

王世崇, 陈彦羽, 侯阳, 邓浩宇… - Acta Materiae …, 2022 - search.ebscohost.com
… , high precision and smooth surface, UV-curing 3D printing … of MCF is 0.15wt%, the viscosity
of MCF/PR composite is … meets the requirements of UV-curing 3D printing. A variety of …

[PDF][PDF] 液相夹杂复合软材料的设计, 制备与力学性能研究进展

李锡英, 王爽, 鲁璐, 吕鹏宇, 易新, 段慧玲 - 复合材料学报, 2021 - coe.pku.edu.cn
… 通过在3D 打印喷嘴处引入液 滴微流控技术,可在打印过程中实现液相夹杂组 分和分布的实时
调控[69,96].Visser 等[97-98] 提出空气 微流体3D 打印技术,实现了多孔材料,生物材 料等液相夹杂…

[PDF][PDF] 气动软体机器人发展现状与趋势

管清华, 孙健, 刘彦菊, 冷劲松 - SCIENTIA SINICA Informationis, 2012 - researchgate.net
… of multi-material 3D printing. (a) Fabrication of fiber reinforced pneumatic soft actuator with …
[145]; (b) multi-material direct writing printing of self-sensing pneumatic soft actuator [147]; (c) …

eeeSeeeee 器﹑ 芯.

SHS Bibliothèque - 2003 - library-archives.canada.ca
… involving diffusion, surface tension, and viscosity to simulate the observed foaming mechanism,
… thesis was to develop integral-skin foam-reinforced large-sized, complex-shaped, single-…

A Self-Healing Flexible Sensor Based on Epoxidized Natural Rubber With Synergistic Effect of Coordination and Hydrogen Bonds (一种基于环氧天然橡胶的自愈柔性 …

W Hu, W Lu, F Fei, W Dai, X Chai, P Zhou… - Available at SSRN … - papers.ssrn.com
… All ENR-UPy elastomers owned high tensile properties with a tensile strain >800%. As the
… 5c showed that the material produces a response hysteresis, which is caused by the viscous

氧化石墨烯/多壁碳纳米管影响天然橡胶性能的实验研究.

高浩, 时文欣, 宋维浩, 李利 - Acta Materiae Compositae …, 2022 - search.ebscohost.com
… MWCNTs are added at 3wt% and 6wt%, respectively, the filler particles have the best
reinforcement effect on the rubber. Its good thermal conductivity enhances the uniformity of the …

[PDF][PDF] 类玻璃高分子的研究进展.

曾艳宁, 杨斌, 刘澍鑫, 席澳千… - Journal of Guilin …, 2022 - manu28.magtech.com.cn
… Recyclable polybutadiene elastomer based on dynamic imine bond [J]. Journal of Polymer
Science, … Catalystfree room-temperature self-healing elastomers based on aromatic disulfide …

[PDF][PDF] 软体足式机器人驱动, 建模与仿真研究综述

牛丽周, 丁亮, 高海波, 杨怀广, 苏杨, 李楠 - 机械工程学报, 2021 - researchgate.net
… Harnessing viscous flow to simplify the actuation of fluidic soft robots[J]. Soft Robotics,2020,7…
3D printed soft actuators for a legged robot capable of navigating unstructured terrain[C]//…

碳基填料填充型热界面材料的研究现状.

黄飞, 秦文波, 舒登峰, 孙佳晨… - … Materials Science & …, 2023 - search.ebscohost.com
… of thermal conductivity in composites filled with expanded graphite and multi-walled
carbon nanotube fillers via meltcompounding based on polymerizable low-viscosity oligomer …

聚合物基电磁屏蔽复合材料的结构设计与性能研究进展.

张梦辉, 马忠雷, 马建中, 黎星… - Acta Materiae …, 2021 - search.ebscohost.com
: 对近年来关于聚合物基电磁屏蔽材料的报道进行了综述. 重点总结分析了不同结构(如多孔结构
, 隔离结构和分层结构) 及其他特殊结构聚合物基电磁屏蔽材料的屏蔽效能和屏蔽机制. 与均匀…