… Electroplated nickel is a promising material to realize movable structures for micro-electro-…
Nickel-based structures fulfill the requirements [1]. Electroplated nickel structures show a …

… , there is no electroplating process … electroplating amorphous gold–nickel alloy by using a
bath prepared by adding a gold salt into a known plating bath that produces amorphous nickel…

… The microstructure characterization of the composites and the nickel … nickel plated
specimens for determining the adhesion characteristics. Hardness and residual stresses for nickel …

… Electroplating a magnetic material such as permalloy (80% Ni, 20% Fe) is relatively difficult
in comparison with electroplating pure metals such as nickel. Typically, the application sets …

… nickel metal matrix, does not affect significantly the above mentioned texture sequence of Ni
… bath, leads to composites characterized by a random Ni crystalline orientation by applying …

… Characterization The magnetic properties of the electroplated NiFe and CoNiFe alloys have
… new setup allowing for wafer level characterization of electroplated films. The setup exploits …

… grains during the electroplating and inhibited the grain growth … /Ni samples after heat
treatment at 400 C for 24 h. The mechanisms of hardening and wearing of Ni-based electroplated …

… electroplated tandem layer black nickel coatings from nickel- … just as the inventors of this
black nickel process [5]. But to … Sample characterization by combining different methods has …

… nickel alloys, such as Ni-P and Ni-WP alloy, both of which have melting points lower than
pure Ni. In this study, bright pure nickel was coated on CFs surface by electroplating. …

… elastic properties of our electroplated nickel layers. X-Ray measurements show that the
internal stresses for this device vary versus the thickness of the nickel layer, between 30 MPa at …