… observed that the ability to store and deliver charge for electrochemical cells consisting of
LiCoO 2 (cathode)/SiO 2 /Si(anode) was inversely proportional to current density. Zhou et al. …

Novel high-capacity electrode materials are required to increase the energy density of
lithium-ion batteries. Metal polysulfides, MS x (x> 2), are plausible candidates for such materials, …

… 11 and 12 report areal-specific capacities of 55–60 μAh/cm 2 -μm at 3.5 V while we observed
approximately 75 μAh/cm 2 -μm at this voltage. This observation may be partly reconciled …

… In this Perspective, we provide an overview of the emerging field of redox ECs, including
the … We also provide a perspective on the advantage of dual-redox ECs and how to improve …

… k 2 for the cuprous ions to metallic copper is 130 mol·m −2 s −1 and k −2 for the metallic
copper to … In order to control the cuprous ions, N 2 and O 2 have been used for purge the …

… The surface concentration of Si-OH groups at SiO 2 is estimated at ca. 8.0 μmol/m … The
rate of SiO 2 dissolution ie, thickness decrease of the SiO 2 layer vs. time can be directly …

… Ar and O 2 gases used for electrochemical cell testing were ultra high purity (Airgas). Li-O
2 cells were cycled inside an incubator kept at 30C using a VMP3 potentiostat (Bio-Logic). …

… mF cm –2 at 1 mA cm –2 with superior rate capability and ultralong cycling stability. As the
catalyst for HER in 0.5 MH 2 SO 4 , it shows an overpotential of 146 mV at 10 mA cm –2 , a …

The performance of lithium-ion batteries (LIBs) depends critically on the nature of the solid–electrolyte
interphase (SEI) layers formed on their electrodes surfaces, which are, in turn, …

To fill electroless nickel to submicrometer trenches on the SiO2 surface, a Pd-activated self
assembled monolayer (SAM) of aminopropyltrimethoxy silane was formed on the surface of …